Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 11-16-2019, 06:41 AM   #1
Junior Member
Join Date: Jul 2010
Location: Perth Hills Western Australia
Posts: 20
Default B model distributor question

Does the B model distributor/head use the same bolt on the side of the head to keep it held down?
I am trying to remove the distributor but there is no bolt in the side hole and it appears to be a blind hole. The Distributor is rusted badly and that may make it hard to remove,but this either has a broken bolt in the hole(itís about a 1/4Ē deep) or it is a blind hole. I touched the bottom of the hole with a 5/16Ē drill and a appears to be soft like cast iron,not a broken bolt.
Any clues please.
barrelnose is offline   Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)

All times are GMT -5. The time now is 06:57 PM.