K R Wilson hydraulic Shock Servicing Tooling.

[Brentwood Bob]

Want the KRWilson hydraulic Shock Servicing Tooling.
Starting with the hold-down Stand, and the weighted arm.

[Brentwood Bob]

For the 1928 thru 1931 model a shocks.

[Brentwood Bob]

Looking.

[Brentwood Bob]

Still on the hunt. I have used the testing apparatus! There is a separate hold down base, and there is the various tools. I intend to use these to restore the original shocks.

[Brentwood Bob]

Got to be out there!
Trade for a rebuilt Zenith sidebowl, or rebuilt OEM shocks? Serious leads welcomed!

[Brentwood Bob]

Sponsored Links (Register now to hide all advertisements)

Still want one. With patina.
Original casting base has the following:
KRW
KRWilson
A386A
HOE DIE Bench Tester

[Brentwood Bob]

If the stars lineup, and USPS is good to me, I will have the tooling this month.
Thank you. Then let the testing begin.

[Brentwood Bob]

Looking for the arm and the weight, and the individual tools.

[Brentwood Bob]

Still looking for the arm and the test weight, there three pieces that make up the arm:
The weight, the arm, and the connecting segment that attaches to the arm and to the shock shaft.

[Brentwood Bob]

The arm, assembled, is what I am looking for.
It is in the middle of the service parts display with the weight
on the right end, and the attachment piece on the left end
that attachs to the shaft of the shock.
It is approximately 27 inches in overall length.

[Brentwood Bob]

Still looking. May have to cobble something together.