|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-14-2021, 05:58 PM | #1 |
Senior Member
Join Date: Aug 2020
Location: Sagle, Idaho
Posts: 359
|
Front bumper bracket tilts downward
Have a 1930 Coupe and the front bumper tilts slightly downward because the end of the right bumper bracket where it attaches to the bumper is twisted slightly forward, causing the bumper to be leaning forward rather than perpendicular to the ground. Has anyone tried to twist the end of the bracket, and if so what was the shade tree method used?
|
05-14-2021, 06:34 PM | #2 |
Senior Member
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,370
|
Re: Front bumper bracket tilts downward
You might try jacking it.
But I’ve always straightened them in a press You may need to remove both so as to mirror-image the correct one to the other |
Sponsored Links (Register now to hide all advertisements) |
|
05-14-2021, 07:24 PM | #3 |
Senior Member
Join Date: Mar 2013
Location: Bend Or.
Posts: 1,056
|
Re: Front bumper bracket tilts downward
Acetylene torch and a rosebud. Takes 2 minutes.
__________________
Bill Worden 1929 Roadster 1929 Briggs Town Sedan 1930 Closed Cab pickup Smith Motor Compressor 1951 Ford F1 High Desert Model A's |
05-15-2021, 08:41 AM | #4 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,463
|
Re: Front bumper bracket tilts downward
Sponsored Links (Register now to hide all advertisements)
__________________
Bob Bidonde |
|
|
Sponsored Links (Register now to hide all advertisements) |
|