The Ford Barn

Gick70 · 10-20-2021, 01:15 PM

I was having low pressure on my factory gauge......so I plumbed a mechanical gauge in also....initial start both gauges are the same,ten minutes if that the factory gauge drops off drastically,is it the sender or the dash gauge??? 1952 flathead f1....

19Fordy · 10-20-2021, 02:36 PM

Sponsored Links (Register now to hide all advertisements)

Probably the sender. This looks like it will work.
https://shoebox-central.com/1946-194...r-sending-unit
and here. The C&G sender below looks like the one on my 53 Ford V8.
https://cgfordparts.com/ufolder/ford...er=41A-9278-OR

Plus, do a search in the SWAP section.

10-20-2021, 01:15 PM	#1
Gick70 Senior Member Join Date: Aug 2017 Posts: 107	Oil sender or gauge I was having low pressure on my factory gauge......so I plumbed a mechanical gauge in also....initial start both gauges are the same,ten minutes if that the factory gauge drops off drastically,is it the sender or the dash gauge??? 1952 flathead f1....

10-20-2021, 02:36 PM	#2
19Fordy Senior Member Join Date: May 2010 Location: Coral Springs FL Posts: 10,920	Re: Oil sender or gauge Sponsored Links (Register now to hide all advertisements) Probably the sender. This looks like it will work. https://shoebox-central.com/1946-194...r-sending-unit and here. The C&G sender below looks like the one on my 53 Ford V8. https://cgfordparts.com/ufolder/ford...er=41A-9278-OR Plus, do a search in the SWAP section. Last edited by 19Fordy; 10-20-2021 at 02:53 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode