|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Junior Member
Join Date: Nov 2016
Posts: 8
|
![]()
I purchased a new fuel pump for my 32-34 ford truck v8 (like 30 years ago-long project). Now Im looking at a photos of fuel pumps on Bob Drake (looking for fuel pump to carb fuel line) and the pump I got seems to match the one drake sells for late 46 and newer. It looks like the one I have will bolt on ok, can I use it? Travel distance too long/short?
|
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 3,906
|
![]()
Use it. No problem.
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Member
Join Date: Dec 2013
Location: Waxahachie, Texas
Posts: 77
|
![]()
As Flatjack says, it will work just fine - aesthetically, it looks wrong on your car.
|
![]() |
![]() |
![]() |
#4 |
Junior Member
Join Date: Nov 2016
Posts: 8
|
![]()
Thanks for this information. It looking wrong is a great excuse for not letting anyone who would actually know it's not technically correct from ever looking under the hood!
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2010
Location: Masterton, New Zealand
Posts: 2,945
|
![]()
Actually, the pump you have, although it resembles Drakes pump, will be far superior. By all accounts, Drakes pumps [made in China], do not allow the fuel fittings to seat, resulting in leakage etc.
Don't worry about being put down by the experts; proudly open the hood and display that flathead....at least it isn't a sbc. Who cares if such and such a component isn't what it came with, it's still running the correct style engine. Enjoy
__________________
Unfortunately, two half wits don't make a whole wit! |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: May 2010
Location: Midland, MI
Posts: 145
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: May 2010
Location: Florida and Penna.
Posts: 4,423
|
![]()
The only problem is a 30 year old pump rubber diaphram will
will be bad or wrong material and need to be replaced. G.M.
__________________
www.fordcollector.com |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|