The Ford Barn

Fibber Mcgee · 06-22-2014, 07:10 PM

Does anyone have a picture of the correct fuel pump stand stand for a 41? Since I bought mine it has had a stand with a flat top that twists open and about a 1/2 inch pipe coming off the drivers side that connects to a piece of corrugated metal pipe that runs under the car all the way to the rear and dumps out by the gas tank filler. I was just wondering what correct for 41 looked like so I can buy one. Thanks

1963turnerjohn · 06-22-2014, 08:37 PM

Fibber - that's the same style as my 41 Super Deluxe

41panelmark · 06-22-2014, 08:42 PM

Quote:

Originally Posted by Fibber Mcgee

Does anyone have a picture of the correct fuel pump stand stand for a 41? Since I bought mine it has had a stand with a flat top that twists open and about a 1/2 inch pipe coming off the drivers side that connects to a piece of corrugated metal pipe that runs under the car all the way to the rear and dumps out by the gas tank filler. I was just wondering what correct for 41 looked like so I can buy one. Thanks

I would be interested in the one you have when you take it off. Would like to see if it does a good job of pulling blowby gasses away from the engine area.

Terry,OH · 06-23-2014, 05:01 AM

Take a close look the flip top and tube may be just inserted into the top of the proper fuel pump adaptor. Just remove it and install the correct breather cap. It is an aftermarket system for redirecting the fumes that come out of the engine.

Fibber Mcgee · 06-23-2014, 10:05 AM

Thanks for the replies, I will try to post a picture of what I have as it looks like the bottom of the one above but with a rubber section above it and the flip top above the hose. I originally thought it was homemade but it could be aftermarket since 1963turnerJohn said his is the same.

flatjack9 · 06-23-2014, 12:21 PM

Sponsored Links (Register now to hide all advertisements)

Definetly an aftermarket piece. I have several laying around.

06-22-2014, 07:10 PM	#1
Fibber Mcgee Senior Member Join Date: Oct 2010 Location: Callahan Fla Posts: 1,149	41 fuel pump stand Does anyone have a picture of the correct fuel pump stand stand for a 41? Since I bought mine it has had a stand with a flat top that twists open and about a 1/2 inch pipe coming off the drivers side that connects to a piece of corrugated metal pipe that runs under the car all the way to the rear and dumps out by the gas tank filler. I was just wondering what correct for 41 looked like so I can buy one. Thanks __________________ Wanted, a car with a " Dynaflex Superflowing Unijet Turbovasculator which is Syncromeshed to the Multicoil Hydrotensioned Dual vacuum Dynomometer. "

06-22-2014, 08:37 PM	#2
1963turnerjohn Senior Member Join Date: Dec 2011 Location: Ann Arbor / Canton Michigan Posts: 318	Re: 41 fuel pump stand Fibber - that's the same style as my 41 Super Deluxe

06-23-2014, 10:05 AM	#5
Fibber Mcgee Senior Member Join Date: Oct 2010 Location: Callahan Fla Posts: 1,149	Re: 41 fuel pump stand Thanks for the replies, I will try to post a picture of what I have as it looks like the bottom of the one above but with a rubber section above it and the flip top above the hose. I originally thought it was homemade but it could be aftermarket since 1963turnerJohn said his is the same. __________________ Wanted, a car with a " Dynaflex Superflowing Unijet Turbovasculator which is Syncromeshed to the Multicoil Hydrotensioned Dual vacuum Dynomometer. "

06-23-2014, 12:21 PM	#6
flatjack9 Senior Member Join Date: May 2010 Location: Oshkosh, Wi Posts: 4,527	Re: 41 fuel pump stand Sponsored Links (Register now to hide all advertisements) Definetly an aftermarket piece. I have several laying around.