Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 08-15-2020, 03:42 PM   #1
mcgarrett
Senior Member
 
Join Date: Dec 2013
Location: Waxahachie, Texas
Posts: 949
Default Oil pressure drop

At engine startup on my '40 Ford with stock engine, my oil pressure gauge reads 45+ lbs of pressure on the factory gauge and has done this for quite a few years. After driving for 20-30 minutes and the oil is up to temperature the gauge reads around 10 lbs going down the road and maybe 5 lbs. at idle. My oil pressure sending unit is an old one; maybe the original.

My questions are:
- Is the sending unit malfunctioning perhaps due to age?
- Is it possibly a weak pressure relief spring playing tricks when the oil gets hot?
- Is it a faulty gauge? (it's old too)
...or a combination of the above?
I want to make sure I am diagnosing my problem before I order and replace a part unnecessarily.
mcgarrett is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:39 AM.