Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-22-2020, 12:22 PM   #1
1929
Senior Member
 
Join Date: Jan 2015
Location: New York
Posts: 943
Default Downdraft Carburetor question?

trying to figure out why, when I start the car after sitting in the garage after a week or maybe two, with out using the choke, the car will start up in 3 seconds. I go for a 30 minute ride or more, shut the car off, come back in 15 minutes or more, and the car takes much longer to start, why?
1929 is offline   Reply With Quote
Old 06-22-2020, 01:04 PM   #2
Bob C
Senior Member
 
Join Date: May 2010
Location: So Cal
Posts: 8,711
Default Re: Downdraft Carburetor question?

Possibly the gas in the carb boiling and flooding the engine.
Bob C is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 06-22-2020, 06:56 PM   #3
Synchro909
Senior Member
 
Synchro909's Avatar
 
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,471
Default Re: Downdraft Carburetor question?

Mine is the other way around. After being left for a while, I have sit and wait a while till the fuel pump refills the carb after the fuel has evaporated while the car was sitting. If I come back to it within a day or two, it fires up immediately.
Your situation seems odd to me.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood.
Synchro909 is offline   Reply With Quote
Old 06-22-2020, 10:30 PM   #4
1929
Senior Member
 
Join Date: Jan 2015
Location: New York
Posts: 943
Default Re: Downdraft Carburetor question?

Quote:
Originally Posted by Bob C View Post
Possibly the gas in the carb boiling and flooding the engine.
The intake is never hot though.
Attached Images
File Type: jpg PB140003.jpg (35.5 KB, 104 views)
1929 is offline   Reply With Quote
Old 06-22-2020, 11:08 PM   #5
updraught
Senior Member
 
updraught's Avatar
 
Join Date: Feb 2015
Location: Australia
Posts: 1,966
Default Re: Downdraft Carburetor question?

So it's gravity feed. Do you turn the fuel off?
updraught is offline   Reply With Quote
Old 06-23-2020, 11:52 AM   #6
1929
Senior Member
 
Join Date: Jan 2015
Location: New York
Posts: 943
Default Re: Downdraft Carburetor question?

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by updraught View Post
So it's gravity feed. Do you turn the fuel off?
Shut the fuel off every time,if its going to sit for over an hour.
1929 is offline   Reply With Quote
Old 06-23-2020, 12:16 AM   #7
Jack Shaft
BANNED
 
Join Date: Dec 2019
Posts: 1,196
Default Re: Downdraft Carburetor question?

You should use a fuel pump,strombergs like 2psi.when warm or hot starting do not touch the throttle,just bump the starter and when its right it will fire in less than a full turn.Stromberg float level is critical @15/32"..if the power valve leaks it will cause a hot hard start condition,its located below the accelerator pump plunger,its opened when the throttle opens half way by the accel pump plunger to continue add fuel after the pump is out of stroke.
Jack Shaft is offline   Reply With Quote
Old 06-23-2020, 10:53 AM   #8
Jim Brierley
Senior Member
 
Join Date: Jun 2010
Location: Temecula, CA
Posts: 4,066
Default Re: Downdraft Carburetor question?

Newer cars had a fuel return line so that when the engine was shut off, the fuel pressure in the line was bled off and returned to the tank. This prevented the condition you describe. The Ford 300 CID truck engines did that until Ford sent a bulletin telling owners to drill a very small hole in the fuel pump body that did the same thing. If you are using an electric pump, turn it off a few hundred feet before shutting the engine off. Don't forget to turn it back on after re-starting and heading out, it can be embarrassing. Don't ask how I know this!
Jim Brierley is offline   Reply With Quote
Old 06-23-2020, 11:50 AM   #9
1929
Senior Member
 
Join Date: Jan 2015
Location: New York
Posts: 943
Default Re: Downdraft Carburetor question?

Quote:
Originally Posted by Jim Brierley View Post
Newer cars had a fuel return line so that when the engine was shut off, the fuel pressure in the line was bled off and returned to the tank. This prevented the condition you describe. The Ford 300 CID truck engines did that until Ford sent a bulletin telling owners to drill a very small hole in the fuel pump body that did the same thing. If you are using an electric pump, turn it off a few hundred feet before shutting the engine off. Don't forget to turn it back on after re-starting and heading out, it can be embarrassing. Don't ask how I know this!
Jim, I stopped using the fuel pump a year ago, works fine with out it.
1929 is offline   Reply With Quote
Old 06-23-2020, 10:28 PM   #10
updraught
Senior Member
 
updraught's Avatar
 
Join Date: Feb 2015
Location: Australia
Posts: 1,966
Default Re: Downdraft Carburetor question?

Try shutting it off every time. You don't want fuel leaking into the engine, as what happens with a downdraught if the needle valve doesn't hold.

They don't call me "updraught" for nothing ...
updraught is offline   Reply With Quote
Old 06-24-2020, 07:53 AM   #11
Jack Shaft
BANNED
 
Join Date: Dec 2019
Posts: 1,196
Default Re: Downdraft Carburetor question?



Item 9594 is the power valve,it can leak fuel into the intake...to check run the car and create the condition,shut down,remove the accelerator pump rod and open the throttle plates..look into the air horn and see if fuel is leaking.
Jack Shaft is offline   Reply With Quote
Old 06-24-2020, 11:06 AM   #12
Jim Brierley
Senior Member
 
Join Date: Jun 2010
Location: Temecula, CA
Posts: 4,066
Default Re: Downdraft Carburetor question?

Shut the valve off about 100' before coming to a stop.
Jim Brierley is offline   Reply With Quote
Old 06-25-2020, 07:15 AM   #13
1929
Senior Member
 
Join Date: Jan 2015
Location: New York
Posts: 943
Default Re: Downdraft Carburetor question?

Quote:
Originally Posted by Jim Brierley View Post
Shut the valve off about 100' before coming to a stop.
Thanks, I will do that.
1929 is offline   Reply With Quote
Old 06-25-2020, 08:59 PM   #14
Synchro909
Senior Member
 
Synchro909's Avatar
 
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,471
Default Re: Downdraft Carburetor question?

Another thing I have found with the downdraught carb is that in cold conditions, the throat can ice up, especially if there is humidity about, like fog. The car still runs but quite poorly. Diagnosis took some doing but when I worked it out, I smacked my palm on my forehead. My solution has been to use a piece of exhaust pipe, slit it length wise and clamp it over the exhaust manifold and direct the warm air upwards and into the air cleaner. Problem solved!
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood.
Synchro909 is offline   Reply With Quote
Old 07-02-2020, 09:30 PM   #15
dirt slinger
Junior Member
 
Join Date: Feb 2018
Posts: 2
Default Re: Downdraft Carburetor question?

While on the issue of down draft carbs, can anyone tell me what is an ideal starting point for jet sizing is? Its a stock engine with a Lyon 6.5:1 compression head, down raft tube intake and a tube header.
dirt slinger is offline   Reply With Quote
Old 07-03-2020, 12:55 PM   #16
Benson
Senior Member
 
Join Date: May 2010
Posts: 2,579
Default Re: Downdraft Carburetor question?

repro

Last edited by Benson; 07-14-2020 at 09:21 AM.
Benson is offline   Reply With Quote
Old 07-03-2020, 11:47 AM   #17
Jim Brierley
Senior Member
 
Join Date: Jun 2010
Location: Temecula, CA
Posts: 4,066
Default Re: Downdraft Carburetor question?

Always start with the stock jet sizes for the carb being installed. Carbs are stupid, the only thing they know is how much air is going thru them, and they add the appropriate amount of fuel to produce the correct air/fuel ratio.
Jim Brierley is offline   Reply With Quote
Old 07-03-2020, 04:50 PM   #18
1929
Senior Member
 
Join Date: Jan 2015
Location: New York
Posts: 943
Default Re: Downdraft Carburetor question?

Quote:
Originally Posted by Jim Brierley View Post
Always start with the stock jet sizes for the carb being installed. Carbs are stupid, the only thing they know is how much air is going thru them, and they add the appropriate amount of fuel to produce the correct air/fuel ratio.
Jim is right, stay with the stock jets, I had issues when I changed the stock jets 3 times on my Stromberg.
1929 is offline   Reply With Quote
Old 07-03-2020, 05:49 PM   #19
Benson
Senior Member
 
Join Date: May 2010
Posts: 2,579
Default Re: Downdraft Carburetor question?

Also there is a problem

Last edited by Benson; 07-14-2020 at 09:17 AM.
Benson is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:50 AM.