|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-13-2015, 12:10 PM | #1 |
Member
Join Date: Mar 2014
Location: Bozeman, Montana
Posts: 56
|
taillight harness on 1950 F1-Help
Got a new harness to wire my taillights on a 1950 F1 Pickup. I already put the complete harness on the engine to dash. I have power on the green wire coming from light switch to the taillight at the firewall. Then I have power to the brake light switch but NO Power at the rear harness where it plugs into the taillights. What am I doing wrong???? Otherwise Power at the front of the harness but no power at the rear.
|
06-13-2015, 12:54 PM | #2 |
Senior Member
Join Date: Feb 2011
Posts: 2,113
|
Re: taillight harness on 1950 F1-Help
Do you have power to the Brake SW? Tested SW with VOM?
Could you have picked up, the wrong leads on the light SW? I had to take my original headlight switch apart to clean the contacts.
__________________
Tim Downtown, Ca |
Sponsored Links (Register now to hide all advertisements) |
|
06-13-2015, 05:55 PM | #3 |
Senior Member
Join Date: Jan 2012
Location: Nine Mile Falls,WA
Posts: 900
|
Re: taillight harness on 1950 F1-Help
I had a like problem and found that the bullet connectors were not pushed in far enough.
__________________
The sign of a good craftsman is how well they cover up their mistakes. |
06-13-2015, 06:45 PM | #4 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: taillight harness on 1950 F1-Help
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|