01-04-2011, 06:31 PM | #1 |
Senior Member
Join Date: Sep 2010
Location: rowland PA
Posts: 186
|
7 Tooth
Well, the A is on stands and I have started working on the things it needs to make it safe and reliable.Thanks to all the Barners and the great info I now know what direction to take.I have the 7 tooth column out and apart and I have decided to replace the sector bushings, shaft bearings,upper bushing(which was binding bad), and installing the oversize lower bushing. The lower part of the shaft is scored and I will turn it down to fit the bushing.The worm and sector look ok.My question is, can anyone tell me how well the o ring and washer works that Brattons sells for the sector? If they only leak a little that would work for me.Thanks in advance, Rich.
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|