|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-11-2022, 03:04 PM | #1 |
Senior Member
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 3,954
|
Opinion on a 36LB motor
What would a consensus value be for a 36LB engine....Complete but otherwise unknown condition.... FAIR offer/price??
Thanks Rockfla |
01-11-2022, 03:18 PM | #2 |
Senior Member
Join Date: Mar 2018
Location: Florida panhandle
Posts: 194
|
Re: Opinion on a 36LB motor
Rarity would be the reason to chase it, pig in a poke but depends on how much you can gamble.
|
Sponsored Links (Register now to hide all advertisements) |
|
01-11-2022, 03:20 PM | #3 |
Senior Member
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 3,954
|
Re: Opinion on a 36LB motor
|
01-11-2022, 03:53 PM | #4 |
Senior Member
Join Date: Jan 2012
Location: Lyman,ME.
Posts: 2,629
|
Re: Opinion on a 36LB motor
I would start by making sure it is an LB block ….. Mark
__________________
I'm thinkin' about crankin' My ragged ol' truck up and haulin' myself into town. Billy Joe Shaver |
01-11-2022, 03:55 PM | #5 |
Senior Member
Join Date: May 2010
Location: Charlotte NC KiWi-L100 available here
Posts: 2,960
|
Re: Opinion on a 36LB motor
I would not guess at value without seeing general condition. I would like an LB for myself also have a customer wanting one.
|
01-11-2022, 04:02 PM | #6 |
Senior Member
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 3,954
|
Re: Opinion on a 36LB motor
Sponsored Links (Register now to hide all advertisements)
Last edited by rockfla; 01-11-2022 at 04:11 PM. |
01-11-2022, 04:18 PM | #7 |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,066
|
Re: Opinion on a 36LB motor
Really tough to put a price on one . . . unless you know the block is good (magged, sonic tested and pressure tested).
I won't pay more than about $200 for an unknown as I'm going to put another $250 into it and about a day of time screwing around with it - just to determine whether it is good or not. And if it is not, then I have a big turd to get rid of . . . of which I have too many already. If the block has been cleaned, checked out and has machine shop paperwork with it, then I think the block is worth $1000 or so . . . if somebody understands what it takes to actually get one to that stage. |
01-11-2022, 05:37 PM | #8 |
Senior Member
Join Date: Jul 2016
Location: Lake worth Florida
Posts: 1,100
|
Re: Opinion on a 36LB motor
Pm sent to the op , Rockfla. Have 2 running and on stands
Last edited by Ggmac; 01-11-2022 at 06:02 PM. |
01-11-2022, 05:40 PM | #9 |
Senior Member
Join Date: May 2010
Location: Charlotte NC KiWi-L100 available here
Posts: 2,960
|
Re: Opinion on a 36LB motor
|
01-11-2022, 08:20 PM | #10 |
Senior Member
Join Date: May 2010
Location: Above the gnat line in Georgia
Posts: 7,009
|
Re: Opinion on a 36LB motor
I don't understand all of the lust over an LB engine. Nobody can see it. Babbitt works just as well as loose bearings for all practical reasons. YOU, personally, are never going to wear out poured bearings in YOUR lifetime. Spend your bucks on more practical things like wine, women and whatever. My 2¢.
__________________
Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm". |
01-12-2022, 12:02 AM | #11 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,159
|
Re: Opinion on a 36LB motor
Having a 36 I bought a few LB engines, every one was cracked, the cylinder walls are thin, break through and loose most of original cylinders when sleeving , 2 of them were running ok even though they had intake valve seat cracks---- most other engines I have had good luck in buying blocks without problem cracks.
At Hershey I was looking at a 36 engine that most likely was LB, it turned over but had no compression on 2 cylinders, logistics of moving it kept me from buying it for 200$--- I did buy a T engine for 10$ because it also came with a stand on wheels ( good block, standard bore, no cracks) Last edited by Kurt in NJ; 01-12-2022 at 12:07 AM. |
01-12-2022, 08:08 AM | #12 | |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,179
|
Re: Opinion on a 36LB motor
Quote:
Was that you pushing that T motor at the end of the day in the Orange Field? Tim |
|
01-12-2022, 10:23 AM | #13 |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
|
Re: Opinion on a 36LB motor
Even though I own several '36, 21 stud LB engines, I'd personally rather have a '37 block over a '36 LB in my '35 drivers. A '37, early '38, 21 stud block is much more versatile, and can be built into a better performing engine compared to a '36 LB. It can also be built to look like a '32-'36 engine, with water pumps mounted on front of heads, and block off plates on front of block, or it can be built with 21 stud, water outlets in center of heads, and '37-'48 water pumps mounted on front of block.
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein Last edited by JM 35 Sedan; 01-14-2022 at 12:27 AM. |
01-12-2022, 10:32 AM | #14 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,526
|
Re: Opinion on a 36LB motor
I sold an LB block several years ago for $800. Cleaned, magged and pressure tested. Don't remember what the bore was.
|
01-12-2022, 02:03 PM | #15 |
BANNED
Join Date: May 2010
Posts: 3,019
|
Re: Opinion on a 36LB motor
Heart breaking core shift proclivity.
Charlie ny |
01-12-2022, 03:55 PM | #16 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,159
|
Re: Opinion on a 36LB motor
Yes, as I was pushing the T engine other people kept adding to the pile, the guy I shared a booth with heard the squeaking of the wheels at the other end of the aisle and said he knew it must be me bringing more heavy stuff back, that harbor freight engine stand has plastic wheels that show no wear aft at least a 1/2 mile
|
01-13-2022, 12:39 PM | #17 |
Senior Member
Join Date: Jul 2010
Location: Ventura, CA
Posts: 2,464
|
Re: Opinion on a 36LB motor
I seem to recall that there is actually no way to know if a '36 originally had an LB engine. I have read that Ford continued using the babbitt bearing engines for a couple years to use them up.
I have been told that you should not use detergent oil in an engine that has babbitt bearings. Several years ago we had several stationary engines running various machine in my business, when we had the engines rebuilt the machine shop would install insert bearings in lieu of babbitt, then we could use normal 20-50 Castorol GTX in the engine.
__________________
Bill.... 36 5 win cpe |
01-13-2022, 03:28 PM | #18 |
Senior Member
Join Date: May 2010
Location: Qld, Australia
Posts: 4,215
|
Re: Opinion on a 36LB motor
There is a way to tell if its a LB engine from the outside
Lawrie |
01-13-2022, 03:38 PM | #19 |
Senior Member
Join Date: May 2010
Location: so cal, placerville, vegas
Posts: 1,394
|
Re: Opinion on a 36LB motor
|
01-13-2022, 06:46 PM | #20 |
Senior Member
Join Date: May 2010
Location: Qld, Australia
Posts: 4,215
|
Re: Opinion on a 36LB motor
Not the stamp but the two hokes in the pan area used to set up the block for machine at the factory, there is one on the front of the engine ,look at an old post as there is a pic of it.
Lawrie |
|
|
Sponsored Links (Register now to hide all advertisements) |
|