The Ford Barn

firetique57 · 11-23-2014, 04:59 PM

I'm rebuilding a transmission for my RPU. The tranny I have didn't have a throwout bearing on it. Which side of the bearing faces the throw out hub and which faces the clutch plate?

scrapiron · 11-23-2014, 05:04 PM

The hard face against the fingers.

Mike V. Florida · 11-23-2014, 05:53 PM

yes the first picture.

firetique57 · 11-23-2014, 06:29 PM

Sponsored Links (Register now to hide all advertisements)

Thanks guys,

That's what I thought, just wanted to be sure. I just pressed it on and it fits like a glove! One more item checked off.

Andy

11-23-2014, 05:04 PM	#2
scrapiron Senior Member Join Date: Sep 2010 Location: Independence, VA Posts: 423	Re: Throwout bearing placement The hard face against the fingers.

11-23-2014, 05:53 PM	#3
Mike V. Florida Senior Member Join Date: May 2010 Location: South Florida Posts: 14,054	Re: Throwout bearing placement yes the first picture. __________________ What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II

11-23-2014, 06:29 PM	#4
firetique57 Senior Member Join Date: Jul 2011 Location: Walkertown, NC Posts: 105	Re: Throwout bearing placement Sponsored Links (Register now to hide all advertisements) Thanks guys, That's what I thought, just wanted to be sure. I just pressed it on and it fits like a glove! One more item checked off. Andy