Water outlet on cylinder head

[Ronnie Lawson]

Does anybody know who builds the Water outlet in the attached thumbnail?
Thanks
Ron

[steve s]

Originally Posted by Ronnie Lawson

Does anybody know who builds the Water outlet in the attached thumbnail?
Thanks
Ron

Vintage Precision, Inc.: You can read the company name on the unit in photo.

The owner of that car is a kindred spirit. Never saw another car with the Cling serpentine system before.

Steve

[Jim Parker Toronto]

It is a nice unit, well made. Here is the contact info:

Bill Pugh [[email protected]]

Bill Pugh
Vintage Precision Inc. (A division of Ralphs-Pugh Inc.)
3931 Oregon St
Benicia Ca 94510 USA
Voice (707) 745-6363
Fax (707) &45-3942

[steve s]

Originally Posted by Ronnie Lawson

Does anybody know who builds the Water outlet in the attached thumbnail?
Thanks
Ron

What is that spark advance deal on the car in this picture? A manual over-ride connected to the throttle?

Is that a siren, or what, at the top on that firewall shelf?

I thought I knew my accessories, but this guy is a master.

Steve

[Jim Parker Toronto]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by steve s

What is that spark advance deal on the car in this picture? A manual over-ride connected to the throttle?

Answer: looks like a manual/automatic advance for the spark hooked into the gas linkage...

Is that a siren, or what, at the top on that firewall shelf?
Answer: Yes, it looks like a siren, sounds like a siren, must be.....

I thought I knew my accessories, but this guy is a master.

Steve

see above