Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 08-15-2020, 07:22 PM   #1
DannL
Senior Member
 
DannL's Avatar
 
Join Date: Jul 2019
Location: Oklahoma City, OK
Posts: 184
Default Fuel pressure at the carburetor?

For you math nuts. What is the fuel pressure at the carburetor fuel inlet when the tank has 10 gallons of fuel, and fuel shut-off in the cab is wide open?
__________________
Not a Purist.
DannL is offline   Reply With Quote
Old 08-15-2020, 07:53 PM   #2
Cory Moffat
Member
 
Cory Moffat's Avatar
 
Join Date: May 2010
Location: Chief lake BC Canada
Posts: 60
Default Re: Fuel pressure at the carburetor?

Nominal
Cory Moffat is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 08-15-2020, 07:57 PM   #3
Jack Shaft
BANNED
 
Join Date: Dec 2019
Posts: 1,196
Default Re: Fuel pressure at the carburetor?

30/31 has more than a 28/29,..over 2psi on a full tank,it will run a Stromberg 97 no problem
Jack Shaft is offline   Reply With Quote
Old 08-15-2020, 08:10 PM   #4
1930-Pickup
Senior Member
 
Join Date: Mar 2017
Location: southern California
Posts: 725
Default Re: Fuel pressure at the carburetor?

The specific gravity of car fuel at 60F is about 0.73 (Google).
The vertical distance from the carb inlet to the top of a late 1930 full tank is about 22 inches.

If the liquid was water, then the pressure would be 22 in/H2O.
But this is fuel, so
22 x .73 = 16.06 in/H2O

16.06 = 0.58 PSI.

What do you guys think? Sound about right?


Revised 8-16-2020. Was 60C, is 60F.

Last edited by 1930-Pickup; 08-16-2020 at 06:36 PM.
1930-Pickup is offline   Reply With Quote
Old 08-15-2020, 10:47 PM   #5
PalAl
Senior Member
 
PalAl's Avatar
 
Join Date: Jul 2016
Location: Orangeville Illinois
Posts: 461
Default Re: Fuel pressure at the carburetor?

Quote:
Originally Posted by 1930-Pickup View Post
The specific gravity of car fuel at 60C is about 0.73 (Google).
The vertical distance from the carb inlet to the top of a late 1930 full tank is about 22 inches.

If the liquid was water, then the pressure would be 22 in/H2O.
But this is fuel, so
22 x .73 = 16.06 in/H2O

16.06 = 0.58 PSI.

What do you guys think? Sound about right?
Ugh........... what???????!
PalAl is offline   Reply With Quote
Old 08-16-2020, 02:29 AM   #6
johnbuckley
Senior Member
 
johnbuckley's Avatar
 
Join Date: Jul 2010
Location: United Kingdom
Posts: 1,439
Default Re: Fuel pressure at the carburetor?

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by 1930-Pickup View Post
The specific gravity of car fuel at 60C is about 0.73 (Google).
The vertical distance from the carb inlet to the top of a late 1930 full tank is about 22 inches.

If the liquid was water, then the pressure would be 22 in/H2O.
But this is fuel, so
22 x .73 = 16.06 in/H2O

16.06 = 0.58 PSI.

What do you guys think? Sound about right?
Yes that's how I reckoned too. Now what is the difference in the carb fuel bowl with a full tank compared with an almost empty tank . Spoiler alert (I reckoned c 1mm, but I may be wrong)
johnbuckley is offline   Reply With Quote
Old 08-16-2020, 04:58 AM   #7
Aretino
Senior Member
 
Aretino's Avatar
 
Join Date: Jul 2018
Location: Dallas, TX, Angola, IN
Posts: 157
Default Re: Fuel pressure at the carburetor?

Correct. About half a pound of pressure.
Aretino is offline   Reply With Quote
Old 08-16-2020, 05:25 AM   #8
McMimmcs
Senior Member
 
McMimmcs's Avatar
 
Join Date: Sep 2019
Location: Fort Gratiot, Michigan
Posts: 2,296
Default Re: Fuel pressure at the carburetor?

please tell us why it matters!
McMimmcs is offline   Reply With Quote
Old 08-16-2020, 05:54 AM   #9
johnbuckley
Senior Member
 
johnbuckley's Avatar
 
Join Date: Jul 2010
Location: United Kingdom
Posts: 1,439
Default Re: Fuel pressure at the carburetor?

Quote:
Originally Posted by McMimmcs View Post
please tell us why it matters!
Well, it could matter if one decided to put a fuel tank at the back of the car and utilise a pump. (It is also a neat math exercise.)

Last edited by johnbuckley; 08-16-2020 at 06:59 AM.
johnbuckley is offline   Reply With Quote
Old 08-16-2020, 06:59 AM   #10
old31
Senior Member
 
Join Date: Jan 2016
Posts: 2,088
Default Re: Fuel pressure at the carburetor?

Oh you guys are killing me. My head hurts. I'm confused. I'm old. What math, arithmetic pleeeeeze save me.

All I know and care about is when I turn the valve the gas flows down hill. That has something to do with gravity, and that is good enough for me thank you.
old31 is offline   Reply With Quote
Old 08-16-2020, 07:57 AM   #11
daren007
Senior Member
 
Join Date: Apr 2015
Location: Saint Cloud Mn
Posts: 745
Default Re: Fuel pressure at the carburetor?

This is called “head pressure”. For those that fly this is important especially between high wing and low wing aircraft.
daren007 is offline   Reply With Quote
Old 08-16-2020, 09:11 AM   #12
DannL
Senior Member
 
DannL's Avatar
 
Join Date: Jul 2019
Location: Oklahoma City, OK
Posts: 184
Default Re: Fuel pressure at the carburetor?

Quote:
Originally Posted by McMimmcs View Post
please tell us why it matters!
Thats funny. Two carburators and multiple shut-off valve changes and still if I don't take special steps fuel will drip from the intake. Having had to drain the tank multiple times over the past year, I was surprised how little pressure there was at the fuel line on a full tank. I figure more than 60 lbs of fuel. Thought it would be an interesting question.
__________________
Not a Purist.
DannL is offline   Reply With Quote
Old 08-16-2020, 09:28 AM   #13
McMimmcs
Senior Member
 
McMimmcs's Avatar
 
Join Date: Sep 2019
Location: Fort Gratiot, Michigan
Posts: 2,296
Default Re: Fuel pressure at the carburetor?

Quote:
Originally Posted by old31 View Post
Oh you guys are killing me. My head hurts. I'm confused. I'm old. What math, arithmetic pleeeeeze save me.

All I know and care about is when I turn the valve the gas flows down hill. That has something to do with gravity, and that is good enough for me thank you.
A wise man indeed. Your logic is what the hobby is all about. Our hobby will last forever with people like you. Hooray !
McMimmcs is offline   Reply With Quote
Old 08-16-2020, 09:31 AM   #14
Bob Bidonde
Senior Member
 
Bob Bidonde's Avatar
 
Join Date: May 2010
Location: Long Island, NY
Posts: 3,432
Default Re: Fuel pressure at the carburetor?

The equation for the static pressure at the bottom of the tank Pressure = density of gasoline x acceleration due to gravity x height of tank. This is high school science and it came before rocket science! As a matter of fact, Daniel Bernoulli (1700 to 1782), a Swiss mathematician and physicist, developed this science in his theories of fluid mechanics.
__________________
Bob Bidonde
Bob Bidonde is offline   Reply With Quote
Old 08-16-2020, 10:07 AM   #15
katy
Senior Member
 
katy's Avatar
 
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,011
Default Re: Fuel pressure at the carburetor?

The specific gravity of car fuel at 60C is about 0.73 (Google).

Methinks that you meant 60°F
__________________
If you don't hear a rumor by 10 AM, start one!.
Got my education out behind the barn!
katy is offline   Reply With Quote
Old 08-16-2020, 11:59 AM   #16
Patrick L.
Senior Member
 
Patrick L.'s Avatar
 
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
Default Re: Fuel pressure at the carburetor?

Quote:
Originally Posted by daren007 View Post
This is called “head pressure”. For those that fly this is important especially between high wing and low wing aircraft.



???????
I've been a CFII/MEII for 40 years. Your gonna have to explain that one to me.

Last edited by Patrick L.; 08-16-2020 at 12:12 PM.
Patrick L. is offline   Reply With Quote
Old 08-16-2020, 12:48 PM   #17
eagle
Senior Member
 
eagle's Avatar
 
Join Date: Aug 2011
Location: Eagle Bend, MN
Posts: 2,025
Default Re: Fuel pressure at the carburetor?

It's not about the weight of the volume of the tank, it's about the weight of the column of fuel. A water tower with water level at 100 feet will have the same pressure if it hold 100 gallons or 1 million gallons.
__________________
"There are some that can destroy an anvil with a teaspoon and shouldn't be allowed to touch anything resembling a tool."
eagle is offline   Reply With Quote
Old 08-16-2020, 01:12 PM   #18
30 Closed Cab PU
Senior Member
 
Join Date: Aug 2018
Posts: 2,332
Default Re: Fuel pressure at the carburetor?

Quote:
Originally Posted by eagle View Post
It's not about the weight of the volume of the tank, it's about the weight of the column of fuel. A water tower with water level at 100 feet will have the same pressure if it hold 100 gallons or 1 million gallons.



My brain hurts, but then I could not get through/pass Physics class in College either.
30 Closed Cab PU is offline   Reply With Quote
Old 08-16-2020, 05:41 PM   #19
springerpete
Senior Member
 
springerpete's Avatar
 
Join Date: Jul 2012
Location: Central Maine
Posts: 643
Default Re: Fuel pressure at the carburetor?

The pressure a liquid exerts depends on the height/depth of the liquid, its weight density and force of gravity.
Two equations: P = mgh or P = Dw(h) where m = liquid mass, g = gravity, h = liquid height/depth and Dw = liquid weight density.

Either way you do it the answer here, ( 22" height ) = .58 lbs/sq inch.

What no one figured tho' is the # of sq inches of area in the cross section of the tube that feeds the gas to the carburetor. It certainly is not 1 sq inch. The ID of the tube might be 1/8" or .125 ".

Some of you are asleep now with these #'s. If not you can continue on. It is an interesting exercise. The only answer needed here is that the system in a Model A works so the Ford engineers had it figured out OK. Bill
springerpete is offline   Reply With Quote
Old 08-16-2020, 05:53 PM   #20
Patrick L.
Senior Member
 
Patrick L.'s Avatar
 
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
Default Re: Fuel pressure at the carburetor?

If I wanted to know the pressure [ I don't ] I would just hook up a gauge. Maybe the needle would give a little wiggle.
Patrick L. is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:04 AM.