|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-12-2019, 07:55 AM | #1 |
Junior Member
Join Date: Oct 2019
Location: Germany near by Stuttgart
Posts: 2
|
Ford Model A OIL Filterkit A 7605
Hi Model A specialists
I have since two month a model a roadster pickup of 1929 with the original engine. There i a Filterkit mounted from MACs. Part #: 28-24062-1 Its mounted to the timing gear cover. Does anyone know how does it work? The copper line goes to the high pessure connected to the the oilpump where also the oil pressure gauge has to be connected. But what happens with the pressure trough the Filter? Is there a pressure relief valve mounted in the filter? And if yes what max. pressure is installed? if yes then makes a prssure Guge on same connector sense? Macs doesnt answer this question. kindly regards Robert |
11-12-2019, 09:29 AM | #2 |
Senior Member
Join Date: Aug 2010
Posts: 260
|
Re: Ford Model A OIL Filterkit A 7605
Sponsored Links (Register now to hide all advertisements)
Other kits will capture most all of the oil because they have a tube that inserts into the main oil supply discharge in the front of valve galley, after the filter, it dumps the oil back to the 3 main bearings. hope this helps |
Sponsored Links (Register now to hide all advertisements) |
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|