|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
 |
|
Thread Tools | Display Modes |
08-17-2017, 04:17 PM
|
#1 |
|
Member
Join Date: May 2010
Location: Surrey, B.C.,Canada
Posts: 76
|
ECZ-G Cylinder heads, ECG-6564 Rocker arms and Hardware
City:
Surrey
State:
Canada
Price:
850.00
1) 1957 HP FORD ECZ-G cylinder heads, came off a running engine but I would have machine shop go through them before installation. ($300)
2) Set (16) high ratio ECG-6564 rocker arms with adjusters. I had the tips ground at an engine machine shop who still had adapter for grinding Y-block rocker arms. They also checked the bushings and they're ready for installation. ($300) 3) Rocker shaft assembly hardware, complete less shafts. The stands have been converted to full pressure oiling as per Tim McMaster's recommendation. ($250) Note: prices don't include shipping Last edited by rodomotive; 08-18-2017 at 06:53 PM. |
|
|
|
09-08-2017, 10:55 AM
|
#2 |
|
Member
Join Date: May 2010
Location: Surrey, B.C.,Canada
Posts: 76
|
Re: ECZ-G Cylinder heads, ECG-6564 Rocker arms and Hardware
Bttt
|
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
09-18-2017, 11:03 AM
|
#3 |
|
Member
Join Date: May 2010
Location: Surrey, B.C.,Canada
Posts: 76
|
Re: ECZ-G Cylinder heads, ECG-6564 Rocker arms and Hardware
Sponsored Links (Register now to hide all advertisements)
|
|
|
|
|
«
Previous Thread
|
Next Thread
»
Linear Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 06:53 AM.