|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-03-2020, 06:52 PM | #1 |
Junior Member
Join Date: Dec 2020
Location: west chester PA
Posts: 13
|
Help identify 36 ? 1/2 ton front fenders
I have two sets of front fenders. Both with headlights for a pickup. One set has headlight buckets that are like a sphere cut in half and the other is more cone shaped. what year are they? Thanks.
|
12-03-2020, 07:35 PM | #2 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,028
|
Re: Help identify 36 ? 1/2 ton front fenders
Photos?
|
Sponsored Links (Register now to hide all advertisements) |
|
12-03-2020, 08:12 PM | #3 |
Junior Member
Join Date: Dec 2020
Location: west chester PA
Posts: 13
|
Re: Help identify 36 ? 1/2 ton front fenders
I will get some tomorrow and try to post
|
12-04-2020, 07:11 AM | #4 |
Senior Member
Join Date: May 2010
Location: Edgefield, SC
Posts: 810
|
Re: Help identify 36 ? 1/2 ton front fenders
The 35-37 pickup headlight buckets are more like a sphere cut in half than a cone. The pickup buckets are not very deep...much shallower than the passenger car buckets used in 35 and 36. EBay has a 35-37 pickup headlight bucket listed ...item 293525811901.
|
12-04-2020, 03:51 PM | #5 |
Junior Member
Join Date: Dec 2020
Location: west chester PA
Posts: 13
|
Re: Help identify 36 ? 1/2 ton front fenders
Thank you for the information
|
12-05-2020, 01:40 PM | #6 |
Junior Member
Join Date: Dec 2020
Location: west chester PA
Posts: 13
|
Re: Help identify 36 ? 1/2 ton front fenders
Sponsored Links (Register now to hide all advertisements)
|
12-05-2020, 03:26 PM | #7 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 1,283
|
Re: Help identify 36 ? 1/2 ton front fenders
Front fenders 1935 1/2 ton directly interchange with 1936-37 1/2 ton.
The difference is 1935 has a hole for the bumper arms, the 1936-37 have a slot. Front fenders 1935-37 1/2 ton and 1-1/2 ton DO NOT interchange. The 1-1/2 ton is larger and the bottom of the fender/running board is at least 8" below that of a 1/2 ton. |
12-06-2020, 08:10 AM | #8 |
Junior Member
Join Date: Dec 2020
Location: west chester PA
Posts: 13
|
Re: Help identify 36 ? 1/2 ton front fenders
Thank you for that helpful information any guess on value of the fenders they are solid just some dents.
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|