Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 01-31-2018, 10:38 AM   #1
CB919ER
Senior Member
 
CB919ER's Avatar
 
Join Date: Jul 2016
Location: Chattanooga, TN
Posts: 114
Default Replace Radiator

I'm getting ready to replace the radiator on my Model A and I was wondering if there are any tip/tricks I need to know about before diving in.

And yes, I'm planning to change the thermostat in the car while I'm at it.

Thanks for any suggestions and help
CB919ER is offline   Reply With Quote
Old 01-31-2018, 11:03 AM   #2
wmws
BANNED
 
Join Date: Feb 2013
Location: Coatesville, Pa
Posts: 719
Default Re: Replace Radiator

It is all very streight forward. You might take the opportunity to reverse flush you engine block.
wmws is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 01-31-2018, 11:08 AM   #3
TinCup
Senior Member
 
TinCup's Avatar
 
Join Date: May 2010
Location: OKC / Tonkawa, Ok.
Posts: 1,977
Default Re: Replace Radiator

Yes flushing the block is a very important step. Next after installation. I had a member of our club place a piece of ladies hose in the upper neck to catch any trash. Even after flushing the block after driving for 30 days with the hose in place he removed a golf ball size clump of junk that would have plugged the new cores for sure.
TinCup is offline   Reply With Quote
Old 01-31-2018, 12:03 PM   #4
CB919ER
Senior Member
 
CB919ER's Avatar
 
Join Date: Jul 2016
Location: Chattanooga, TN
Posts: 114
Default Re: Replace Radiator

Quote:
Originally Posted by wmws View Post
It is all very streight forward. You might take the opportunity to reverse flush you engine block.
Thanks for the tip. Forgive my ignorance, but do I just pour a flushing agent in the top water hose and wait for it to run out the bottom of the engine?
CB919ER is offline   Reply With Quote
Old 01-31-2018, 02:00 PM   #5
Jacksonlll
Senior Member
 
Jacksonlll's Avatar
 
Join Date: Jul 2012
Location: Michigan-- Member of Oakleaf of MARC
Posts: 1,686
Send a message via ICQ to Jacksonlll
Default Re: Replace Radiator

Run the water from the top to the bottom to get a reverse flow.
Jacksonlll is offline   Reply With Quote
Old 01-31-2018, 02:56 PM   #6
CB919ER
Senior Member
 
CB919ER's Avatar
 
Join Date: Jul 2016
Location: Chattanooga, TN
Posts: 114
Default Re: Replace Radiator

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by Jacksonlll View Post
Run the water from the top to the bottom to get a reverse flow.
Thank you Sir!
CB919ER is offline   Reply With Quote
Old 01-31-2018, 06:34 PM   #7
1crosscut
Senior Member
 
1crosscut's Avatar
 
Join Date: Feb 2011
Location: Lincoln, Nebraska
Posts: 1,905
Default Re: Replace Radiator

Makes a bit more of a mess per say but putting a garden hose at full flow along with adding bursts of high pressure air into the lower inlet of the engine works well. Use a rag to seal around where they enter the lower inlet. It will puke water out the upper outlet quite vigorously. Does a good job of breaking things loose and clearing things out.

Why are you replacing the radiator?
__________________
Dave / Lincoln Nebraska
1crosscut is offline   Reply With Quote
Old 02-01-2018, 10:27 AM   #8
CB919ER
Senior Member
 
CB919ER's Avatar
 
Join Date: Jul 2016
Location: Chattanooga, TN
Posts: 114
Default Re: Replace Radiator

Quote:
Originally Posted by 1crosscut View Post
Makes a bit more of a mess per say but putting a garden hose at full flow along with adding bursts of high pressure air into the lower inlet of the engine works well. Use a rag to seal around where they enter the lower inlet. It will puke water out the upper outlet quite vigorously. Does a good job of breaking things loose and clearing things out.

Why are you replacing the radiator?
There are some flow issues in the original radiator as well as some upper neck damage. Just want to make sure the water pump can do its job, and the car can stay cool.
CB919ER is offline   Reply With Quote
Old 02-01-2018, 10:59 AM   #9
daveymc29
Senior Member
 
daveymc29's Avatar
 
Join Date: Sep 2010
Location: Danville, CA
Posts: 1,550
Default Re: Replace Radiator

On my cars to back flush you have to put water in from the top. I made a fitting to attach the hose to the bottom so I can flush it both directions with air and water. Works quite well. Yesterdays project showed no rust either way yet the radiator is plugged and has to be recored. Rodding wouldn't work, too far gone.
daveymc29 is offline   Reply With Quote
Old 02-01-2018, 02:01 PM   #10
28Ca8149
Senior Member
 
Join Date: Dec 2010
Location: Alberta CA
Posts: 109
Default Re: Replace Radiator

I bought a new rad $700 Ca only to find out that the filling spout is 3/8” higher than the original.When the cap is put on it is too high . Repo junk ,can’t even copy to original I may take it out and put the original spout on
28Ca8149 is offline   Reply With Quote
Old 02-01-2018, 02:15 PM   #11
hardtimes
Senior Member
 
hardtimes's Avatar
 
Join Date: May 2010
Location: South California
Posts: 6,188
Default Re: Replace Radiator

Quote:
Originally Posted by CB919ER View Post
I'm getting ready to replace the radiator on my Model A and I was wondering if there are any tip/tricks I need to know about before diving in.

And yes, I'm planning to change the thermostat in the car while I'm at it.

Thanks for any suggestions and help
Radiators are very expensive, even used in good condition. Therefor, protecting you investment is important, eh !

I cut thick cardboard to size and attach it to front and back to protect FINS from damage. Easier/cheaper than trying to repair damage after it is done. Good luck.
hardtimes is offline   Reply With Quote
Old 02-01-2018, 02:54 PM   #12
BillCNC
Senior Member
 
BillCNC's Avatar
 
Join Date: Aug 2017
Location: SoCal Desert
Posts: 826
Default Re: Replace Radiator

Quote:
Originally Posted by hardtimes View Post

I cut thick cardboard to size and attach it to front and back to protect FINS from damage. Easier/cheaper than trying to repair damage after it is done. Good luck.
Great tip, ... Thanks!

Regards
Bill
BillCNC is offline   Reply With Quote
Old 02-01-2018, 03:52 PM   #13
rocket1
Senior Member
 
Join Date: Mar 2014
Location: Midland Park,N.J.
Posts: 1,108
Default Re: Replace Radiator

Change the thermostat? Was there one installed in the upper hose?
rocket1 is offline   Reply With Quote
Old 02-01-2018, 04:20 PM   #14
JBill
Senior Member
 
Join Date: May 2010
Posts: 702
Default Re: Replace Radiator

When you get your new radiator check it against the old one to make sure all the spots for mounting the radiator shell are properly placed. This should not be a problem if you get it from a reputable dealer, but still.
JBill is offline   Reply With Quote
Old 02-01-2018, 10:12 PM   #15
CB919ER
Senior Member
 
CB919ER's Avatar
 
Join Date: Jul 2016
Location: Chattanooga, TN
Posts: 114
Default Re: Replace Radiator

Quote:
Originally Posted by hardtimes View Post
Radiators are very expensive, even used in good condition. Therefor, protecting you investment is important, eh !
Quote:
Originally Posted by JBill View Post
When you get your new radiator check it against the old one to make sure all the spots for mounting the radiator shell are properly placed. This should not be a problem if you get it from a reputable dealer, but still.
I got one from Snyders,wasn't cheap but not to bad considering other radiators I've purchased in the past. Hopefully all works like it supposed to.
CB919ER is offline   Reply With Quote
Old 02-02-2018, 08:24 AM   #16
Tom F OHIO
Senior Member
 
Tom F OHIO's Avatar
 
Join Date: May 2010
Location: Mansfield, Ohio
Posts: 405
Default Re: Replace Radiator

I got mine from Snyder's and it fit perfectly. If your hood lines up good, consider using the rubber pads at the bottom instead of the think new ones. A fellow member told me about this.
Tom F OHIO is offline   Reply With Quote
Old 02-02-2018, 01:01 PM   #17
CB919ER
Senior Member
 
CB919ER's Avatar
 
Join Date: Jul 2016
Location: Chattanooga, TN
Posts: 114
Default Re: Replace Radiator

Quote:
Originally Posted by Tom F OHIO View Post
I got mine from Snyder's and it fit perfectly. If your hood lines up good, consider using the rubber pads at the bottom instead of the think new ones. A fellow member told me about this.
that's comforting to hear. Again, thank you for the tip
CB919ER is offline   Reply With Quote
Old 02-02-2018, 01:16 PM   #18
CarlG
Senior Member
 
CarlG's Avatar
 
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,109
Default Re: Replace Radiator

I got my radiator from Bergs. No complaints.
__________________
Alaskan A's
Antique Auto Mushers of Alaska
Model A Ford Club of America
Model A Restorers Club
Antique Automobile Club of America
Mullins Owner's Club
CarlG is offline   Reply With Quote
Old 02-02-2018, 07:19 PM   #19
28Ca8149
Senior Member
 
Join Date: Dec 2010
Location: Alberta CA
Posts: 109
Default Re: Replace Radiator

My rad was from one of the above .Don’t know if I just got a bad one .The material on the new rad is not near as good as my original one I have had this car in heated shop since 1969 and could be over 95% correct so things like this bothers me ,when you pay big money .Compare your new one to a old one .be for you put it in .
28Ca8149 is offline   Reply With Quote
Old 02-03-2018, 12:54 AM   #20
MVal
Member
 
Join Date: May 2010
Posts: 69
Default Re: Replace Radiator

For my money I would never buy a radiator with less than 10 fins per inch. But I live in N. Calif and the summers are pretty warm!!
MVal is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:11 AM.