The Ford Barn

Chuck Sea/Tac · 11-01-2017, 01:44 AM

On a. B carb, does a screen go in the inlet? On mine, since my car had a side bowl late carb, I used the filter from the A carb to filter and make the 90°angle to match the A inlet position. Is there another way to get a filter in the B carb that others are using? Just curious as I just cleaned and tested a B carb for a friend.

Chuck Sea/Tac · 11-01-2017, 10:50 PM

Sponsored Links (Register now to hide all advertisements)

Called Renners today, and evidently the B carb had no screen in the carb, because the carb was fueled by a pump, with an inline filter. So , if you want a screen in your B carb, buy the late 31 sediment bowl and related parts. This also orientates the fuel inlet the same as an A carb, so you can use the same fuel line.

11-01-2017, 01:44 AM	#1
Chuck Sea/Tac Senior Member Join Date: May 2010 Location: Between Seattle & Tacoma Posts: 2,354	Carb filter On a. B carb, does a screen go in the inlet? On mine, since my car had a side bowl late carb, I used the filter from the A carb to filter and make the 90°angle to match the A inlet position. Is there another way to get a filter in the B carb that others are using? Just curious as I just cleaned and tested a B carb for a friend.

11-01-2017, 10:50 PM	#2
Chuck Sea/Tac Senior Member Join Date: May 2010 Location: Between Seattle & Tacoma Posts: 2,354	Re: Carb filter Sponsored Links (Register now to hide all advertisements) Called Renners today, and evidently the B carb had no screen in the carb, because the carb was fueled by a pump, with an inline filter. So , if you want a screen in your B carb, buy the late 31 sediment bowl and related parts. This also orientates the fuel inlet the same as an A carb, so you can use the same fuel line.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode