The Ford Barn

Terry, NJ · 12-31-2020, 09:31 PM

Sponsored Links (Register now to hide all advertisements)

First off, I must apologize for not being able to post any pictures! Now, it's a Van Norman, Mod F valve grinder (Not the seat grinder). It's complete, even got the dressing diamond and the wheel. I did every mod A valve and Austin valve I have so it works. It has a Westinghouse 1/4 hp motor with a good cord and switch. New drive belt. All Brass tags are there and readable. Original red paint has some wear. I don't know what else to say about it. IIRC It's 21" X 17". I estimate it weighs in at around 80 - 90 lbs. I prefer local pick up but I will ship it if necessary.
$300

12-31-2020, 09:31 PM	#1
Terry, NJ Senior Member Join Date: May 2010 Location: Bucks Co, Pa Posts: 3,740	Van Norman Valve refacer/ Grinder City: Perkasie State: Pa Price: $300. Sponsored Links (Register now to hide all advertisements) First off, I must apologize for not being able to post any pictures! Now, it's a Van Norman, Mod F valve grinder (Not the seat grinder). It's complete, even got the dressing diamond and the wheel. I did every mod A valve and Austin valve I have so it works. It has a Westinghouse 1/4 hp motor with a good cord and switch. New drive belt. All Brass tags are there and readable. Original red paint has some wear. I don't know what else to say about it. IIRC It's 21" X 17". I estimate it weighs in at around 80 - 90 lbs. I prefer local pick up but I will ship it if necessary. $300