The Ford Barn

langus480 · 04-04-2024, 12:00 AM

Hello all,

Making progress on the 1931 Pickup I recently purchased. I have the cab off the frame and replacing the floor channels/ cross brases when I discovered there are D Nuts for the wooden floor board and rivets.

I want to find a D Nut Hole Punch tool, but I need to know what exactly the size D Nuts are offered in the catalogs, as McMasters is pretty pricy to just guess

https://www.mcmaster.com/products/d-...ockout-punches

Also, does anyone have a drawing or any information that is specific about rivet sizes for these cross brace pieces?

04-04-2024, 12:00 AM	#1
langus480 Member Join Date: May 2017 Posts: 56	D Nut Hole Punch Hello all, Making progress on the 1931 Pickup I recently purchased. I have the cab off the frame and replacing the floor channels/ cross brases when I discovered there are D Nuts for the wooden floor board and rivets. I want to find a D Nut Hole Punch tool, but I need to know what exactly the size D Nuts are offered in the catalogs, as McMasters is pretty pricy to just guess https://www.mcmaster.com/products/d-...ockout-punches Also, does anyone have a drawing or any information that is specific about rivet sizes for these cross brace pieces?