08-28-2018, 12:11 PM | #1 |
Senior Member
Join Date: Jul 2010
Location: upstate NY near Mass border
Posts: 789
|
Tools
Anyone out there have knowledge of a tool company called"kobalt". They sell through our lowes stores and the prices are good. Are they foreign made and how do they stack up to the craftsman? Jack
|
08-28-2018, 12:30 PM | #2 |
Senior Member
Join Date: Dec 2017
Location: Guthrie, OK
Posts: 1,150
|
Re: Tools
Kobalt is Lowe's store brand. Made in China, like everything else - Craftsman included. Go to yard sales for the good stuff.
|
Sponsored Links (Register now to hide all advertisements) |
|
08-28-2018, 12:42 PM | #3 |
Senior Member
Join Date: May 2010
Location: Central, IL
Posts: 3,968
|
Re: Tools
Yup - that said they are decent tools and nicely finished. I think they offer a lifetime warranty as well.
__________________
1929 Model AA - Need long splash aprons! |
08-28-2018, 01:32 PM | #4 | |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Tools
Quote:
Once I found a Kobalt 25 foot tape measure that had some bad road rash. Lowe's swapped it out for a new one, no questions asked. |
|
08-28-2018, 04:18 PM | #5 |
Senior Member
Join Date: Feb 2017
Location: Zanesville Ohio USA
Posts: 266
|
Re: Tools
Yeah, I have bought a few Kobalt tools to fill in for missing or broken ones.. They seem to hold up well and take some abuse. If I need some cheap tools that fit the bill and I'm not gonna use much, Harbor Freight is the way to go.
__________________
1928 Niagara Blue Phaeton 1972 Olds 442 Convertible 1979 MGB -Life's Too Short To Drive Boring Cars- |
08-28-2018, 06:20 PM | #6 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,509
|
Re: Tools
Sponsored Links (Register now to hide all advertisements)
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
08-29-2018, 02:39 PM | #7 |
Member
Join Date: Nov 2015
Location: Grand Haven, MI
Posts: 95
|
Re: Tools
Interesting news about Craftsman tools. Stanley Black and Decker has purchased the brand from Sears and reworked the entire line. The plan is to move manufacturing back to the U.S. and expand the product offering. No word yet about a lifetime warranty, but we can always hope. Craftsman will be available in a number of stores in addition to ACE an Lowes.
|
08-29-2018, 03:01 PM | #8 |
Senior Member
Join Date: Dec 2017
Location: Guthrie, OK
Posts: 1,150
|
Re: Tools
I remember when Stanley and B&D were two different companies, and neither was very highly regarded. Craftsman was a decent alternative to Snap-On, which only really serious mechanics can afford.
|
08-29-2018, 05:39 PM | #9 |
Senior Member
Join Date: Mar 2012
Location: Fairfield, Virginia
Posts: 615
|
Re: Tools
Modern Craftsman tools don't measure up to the name. It isn't just because they are made overthere, it's what "Craftsman" asked for. Cheap. B&D also disappointing. All of the Kobalt tools I have are excellent quality.
|
08-29-2018, 06:08 PM | #10 | |
Senior Member
Join Date: Sep 2011
Location: Meridian, ID
Posts: 568
|
Re: Tools
Quote:
I would put most consumer grade tools at about the same level but I feel like Kobalt (Lowes), Husky (Home Depot) and Pittsburg Pro (harbor freight's brand) are all evenly on par with each other and a pretty good value for the price - I feel like those three are finished and designed better and a slight notch above craftsman and stanley these days. I'd rather go to harbor freight and buy something made in Taiwan that is better quality than go to sears and pay more for an inferior tool made in china. Yes sadly it has come to that. With that said I prefer american made SK tools - not Snap-on prices but well made and made here. I also like to find Proto tools at swap meets and online - Snapon quality and usually more reasonable 2nd hand and will last forever. I consider GearWrench a cut above most consumer grade tools also. GearWrench is imported but great quality and a good value. Some people will go on about warranties and how easy it is to warranty one brand vs. another - but MOST tools out there are made well enough that when used properly will never break unless you're really buying cheap, and the cost to replace the one or two tools actually broken over many years of use is negligible. If you are a professional buying professional tools like Snap-on, Mac, Proto, Cornwell, Matco etc. the tool truck service and tool quality is worth it. If you're a home guy rebuilding a model A and doing the occasional brake job and oil change on your daily driver the consumer tools will work fine.
__________________
Aaron in Tacoma (although still a Montana hillbilly at heart ) Last edited by montanafordman; 08-29-2018 at 06:27 PM. |
|
08-31-2018, 12:36 AM | #11 | |
Senior Member
|
Re: Tools
Quote:
https://toolguyd.com/stanley-black-d...n-back-to-usa/ "Yes. Craftsman branded products will continue to be covered under their existing warranties. In the immediate term, there are no changes to how you will get service regarding your warranty. For more information about this process, please call us at 888-331-4569."
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
|
08-31-2018, 08:11 AM | #12 | |
Senior Member
Join Date: May 2010
Location: Central, IL
Posts: 3,968
|
Re: Tools
Quote:
__________________
1929 Model AA - Need long splash aprons! |
|
08-31-2018, 09:18 AM | #13 | |
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,047
|
Re: Tools
Quote:
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! |
|
09-03-2018, 01:36 PM | #14 |
Senior Member
Join Date: May 2013
Location: Lake Forest, California
Posts: 242
|
Re: Tools
The only problems I have had with Craftsman tools is ratchets that either stop ratcheting or holding sockets on and Phillips screwdrivers wearing at the tip. I kind of remember having a socket that cracked many years ago. Mine get used a lot, so I can’t complain. My biggest issue is occasionally losing a socket.
__________________
Experience is a cruel teacher. It gives the exam first, then the lesson. |
09-03-2018, 05:21 PM | #15 |
Senior Member
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,391
|
Re: Tools
Years ago(still have them) my Dad started me out with S-K and when I started at PWA i hooked on to Williams. Both excellent, along with some of the "old" Craftsman. Have many Stanley tapes, punches, chisels, bits, etc (F in/law was a foreman there, M in/law put tape measures together doing piece work).
Paul in CT |
09-04-2018, 08:38 PM | #16 |
Senior Member
Join Date: Jul 2011
Location: Southwestern Connecticut
Posts: 931
|
Re: Tools
Home/Hobby tools seem to have gotten better in recent years. Even the stuff at Harbor Freight seems pretty good now. Still, I prefer the older professional grade stuff. I've recently been finishing off my set of old Plomb combination wrenches. Nothing like working on a really old car with really old tools.
Ken
__________________
Style beats speed any day, and with a lot fewer tickets. |
09-04-2018, 10:14 PM | #17 |
Senior Member
Join Date: May 2010
Location: Camarillo, CA and Pine Grove, CA
Posts: 2,840
|
Re: Tools
I use and love the feel on my Craftsman tools.
__________________
1921 Runabout 1930 Tudor Early 1930 AA Speed costs money. How fast do you want to go? |
02-17-2020, 06:46 PM | #18 |
Senior Member
Join Date: Oct 2019
Location: Washington
Posts: 175
|
Re: Tools
I use a conglomeration of manufactures I have obtained over the years, and what ever works is fine by me. I have no preference.
|
02-18-2020, 06:41 PM | #19 |
Senior Member
Join Date: Aug 2011
Location: Eagle Bend, MN
Posts: 2,027
|
Re: Tools
Look on Craigslist and you can find some real deals on complete sets of Snap On brand tools. Tools breaking are not usually the issue, it the USABILITY of the tool that makes Snap On worth it to me. When buying used tools, if it says Snap On on it you don't need to decide if its wore out or not, the company will replace them with a smile. I have a lot of other brands including Craftsman, but I replace lost tools with Snap On whenever possible.
__________________
"There are some that can destroy an anvil with a teaspoon and shouldn't be allowed to touch anything resembling a tool." |
02-18-2020, 10:20 PM | #20 |
Senior Member
Join Date: Apr 2019
Location: Mt. Pleasant, SC
Posts: 601
|
Re: Tools
I have a number of Craftsman socket wrenches and box/open end wrenches that are probably 50 years old. I’ve used them since I was a teenager and always thought they were pretty good tools - probably not up to Snap-On quality, though. I’ve never had an issue with them. How would these stack up against present day Kobalt tools ??
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|