The Ford Barn

rottenron36 · 03-21-2021, 10:08 AM

Need help again, and sure it won't be the last time. Slowly putting the pickup back together after 12 years. I have 2 of the screws that mount the top of the windshield to the hinge. Need 2 more but not sure what size they are. Also need both the screws that mount the windshield to the regulator. The regulator screws seem to be a different thread. Once i find out what size they are i will seek a source. Thanks again for your help. Ron

VeryTangled · 03-21-2021, 10:18 AM

Michael Driskell at Third Gen Automotive will know the fasteners, probably have them in stock, and will likely have other good advice that might help. Among other services, he's operating a bolt/fastener business.

I didn't look at every corner of the website, but a phone call is a good way to start. He can't list everything he has ready to sell.

rottenron36 · 03-23-2021, 08:09 AM

I thought with 186 views someone would know the size of the bolts. I will see if the guy at the hardware store can help me. Ron

Don Rogers · 03-23-2021, 11:47 AM

# 12 -24 x 5/8 binding head screws plus shake proof washer.

rottenron36 · 03-24-2021, 08:53 AM

Thank you Don Rogers, you came through again. Thanks for the reply and your knowledge. Ron

Lawson Cox · 03-24-2021, 04:51 PM

Sponsored Links (Register now to hide all advertisements)

For Third Generations $3.29 a pair price you can't crank up your car, much less make a trip to the hardware store. Cheeezzee, Ron.

Randy in ca · 03-24-2021, 06:23 PM

Quote:

Originally Posted by rottenron36

Need help again, and sure it won't be the last time. Slowly putting the pickup back together after 12 years. I have 2 of the screws that mount the top of the windshield to the hinge. Need 2 more but not sure what size they are. Also need both the screws that mount the windshield to the regulator. The regulator screws seem to be a different thread. Once i find out what size they are i will seek a source. Thanks again for your help. Ron

-
Not totally sure which ones you mean here, but assuming it's the ones that attach the regulator arms to the windshield frame I believe they are #10-32 thread, as are the ones on the frame itself.

-

03-23-2021, 08:09 AM	#3
rottenron36 Senior Member Join Date: May 2012 Location: Corbett OR Posts: 233	Re: 36 pickup windshield mounting screws I thought with 186 views someone would know the size of the bolts. I will see if the guy at the hardware store can help me. Ron

03-23-2021, 11:47 AM	#4
Don Rogers Senior Member Join Date: May 2010 Location: Wildwood, MO. (near St. Louis) Posts: 1,792	Re: 36 pickup windshield mounting screws # 12 -24 x 5/8 binding head screws plus shake proof washer.

03-24-2021, 08:53 AM	#5
rottenron36 Senior Member Join Date: May 2012 Location: Corbett OR Posts: 233	Re: 36 pickup windshield mounting screws Thank you Don Rogers, you came through again. Thanks for the reply and your knowledge. Ron

03-24-2021, 04:51 PM	#6
Lawson Cox Senior Member Join Date: May 2010 Location: Above the gnat line in Georgia Posts: 7,009	Re: 36 pickup windshield mounting screws Sponsored Links (Register now to hide all advertisements) For Third Generations $3.29 a pair price you can't crank up your car, much less make a trip to the hardware store. Cheeezzee, Ron. __________________ Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm".

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-21-2021, 10:08 AM	#1
rottenron36 Senior Member Join Date: May 2012 Location: Corbett OR Posts: 233	36 pickup windshield mounting screws Need help again, and sure it won't be the last time. Slowly putting the pickup back together after 12 years. I have 2 of the screws that mount the top of the windshield to the hinge. Need 2 more but not sure what size they are. Also need both the screws that mount the windshield to the regulator. The regulator screws seem to be a different thread. Once i find out what size they are i will seek a source. Thanks again for your help. Ron