11-23-2015, 06:24 PM | #1 |
Senior Member
Join Date: May 2010
Location: Wichita, Kansas
Posts: 710
|
B Head Gasket
Can one buy a copper clad B head gasket with white filler someplace or are they all composite now?
|
11-23-2015, 06:38 PM | #2 |
Senior Member
Join Date: May 2010
Location: Lynden, Wa
Posts: 3,550
|
Re: B Head Gasket
I believe they are all composite now. But, I believe that is what they used back then so why can't you use it now? Maybe use some spray copper coat?
Mike
__________________
1930 TownSedan (Briggs) 1957 Country Sedan |
Sponsored Links (Register now to hide all advertisements) |
|
11-23-2015, 06:47 PM | #3 |
Senior Member
Join Date: May 2010
Location: Wichita, Kansas
Posts: 710
|
Re: B Head Gasket
|
11-23-2015, 06:52 PM | #4 |
Senior Member
Join Date: May 2014
Location: Commercial Point, Ohio
Posts: 239
|
Re: B Head Gasket
The following is from Snyder's website. Is this what you are looking for?
MODEL 'B' HEAD GASKET Head gaskets for the 1932-34 4-cyl. Will also work on the Model A. U.S.A. Choose a Variation 1. B-6051-C $25.50 / ea. Graphite 1928-34 2. B-6051-X $35.75 / ea. Copper 1928-34 |
11-23-2015, 08:05 PM | #5 |
Senior Member
Join Date: May 2010
Location: AZ and WA
Posts: 764
|
Re: B Head Gasket
I used a high temp paint I got from KBS coatings and made the grey composite white. I carefully lifted the copper and painted it back from the edges. That was over a year ago and it still looks pretty good.
|
11-23-2015, 08:55 PM | #6 |
Senior Member
Join Date: May 2010
Location: Camino, CA.
Posts: 3,086
|
Re: B Head Gasket
Sponsored Links (Register now to hide all advertisements)
|
11-23-2015, 11:30 PM | #7 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: B Head Gasket
You can slip a piece of paper on either side of the filler to shield the copper, then use white out or spray paint. I used white out.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|