Column shift arm removal 1941

[fortyonerag]

All,

Can someone walk me through the steps to remove and refit the steering column gear selector arm (P/N 7202) on my 41?

I'd also like to replace the rubber sleeve.

Is it simply a matter of removing the retaining pin, or does it require additional steps?

Any assistance appreciated.

[skidmarks]

Tap the pin on both side and lube it up. They stick over time and some you got to work it back and forth s few times with a punch. After it moves in with little effort, you have to hold both sides in at the same time while wiggling and pulling the lever at the same time.

[TJ]

There is a spring and two steel cups in there so be careful when pulling it apart. They can come flying out and hit you or go places where you can't find them.

[fortyonerag]

Sponsored Links (Register now to hide all advertisements)

Many thanks gents. The green bible diagram makes a lot more sense now....