|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-05-2020, 07:06 PM | #1 |
Junior Member
Join Date: Jul 2013
Posts: 5
|
Windshield frame bracket rivets
There are 2 long aluminum rivets that secure the new bracket to either side of the windshield frame. Anyone have suggestions on setting these rivets.
|
10-06-2020, 03:33 AM | #2 |
Senior Member
Join Date: May 2010
Location: Hangtown, CA
Posts: 556
|
Re: Windshield frame bracket rivets
Sponsored Links (Register now to hide all advertisements)
The replacement rivets I have used are also steel but semi-tubular so the end can be set with a tubular rivet tool. The head of the rivet is just a rounded shape, not countersunk. I had to shorten the rivets just a little bit to allow the rivet tool to form a good shape on the end. |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|