Re: I could not sit idle, have a new project
Cool piece! Didn't think of it until after I just saw that, but I have a couple of those aftermarket Model-A leakless water pumps that I could have donated. Just machine the impellers off the back of the shaft and it would have been era-perfect. Make a plate with slotted holes and the two lower holes countersunk where you could use a couple of 2-tooth steering box eccentrics at the bottom of the backside to tension the belt, and the two bolts at the top to lock it down, ...and you would have been set.
On second thought, what you have done looks awesome!!
|