Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 12-24-2018, 11:36 AM   #1
Joop
Senior Member
 
Joop's Avatar
 
Join Date: May 2010
Location: Glendale, AZ
Posts: 2,939
Default Running engine with a Simmons Swan Manifold

..
Just installed my long owned Simmons Swan manifold.
The car is reacting totally different than with the conventional setup.
Real quiet, slow idle and very speedy.
Would love to hear from fellow Barn members who have the same setup what there experience is in setting the spark plug gap, the timing and adjusting the carburetor, I am using a Simmons carburetor as well and 5.5 Snyder head.

Thanks and Merry Christmas

..
Attached Images
File Type: jpg IMG_7908.jpg (46.0 KB, 404 views)
File Type: jpg IMG_7911.jpg (48.0 KB, 544 views)

Last edited by Joop; 12-24-2018 at 12:34 PM.
Joop is offline   Reply With Quote
Old 12-24-2018, 02:16 PM   #2
1931 flamingo
Senior Member
 
1931 flamingo's Avatar
 
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,389
Default Re: Running engine with a Simmons Swan Manifold

Can't help BUT "pretty slick" ! !


Merry Christmas ! !
Paul in CT
1931 flamingo is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 12-29-2018, 07:53 AM   #3
Joop
Senior Member
 
Joop's Avatar
 
Join Date: May 2010
Location: Glendale, AZ
Posts: 2,939
Default Re: Running engine with a Simmons Swan Manifold

There must be people out there who are running this setup
Joop is offline   Reply With Quote
Old 12-30-2018, 11:10 AM   #4
Gene F
Senior Member
 
Gene F's Avatar
 
Join Date: Mar 2012
Location: Ohio
Posts: 1,915
Default Re: Running engine with a Simmons Swan Manifold

I have never heard of this, let alone seen one. Interesting
Gene F is offline   Reply With Quote
Old 01-01-2019, 08:25 AM   #5
ericr
Senior Member
 
ericr's Avatar
 
Join Date: Apr 2012
Posts: 1,542
Default Re: Running engine with a Simmons Swan Manifold

I think one is pictured in the "Unauthorized Accessories" book. I once had a non-Ford 1926 auto with a Lycoming 6-cylnder engine that used a Swan manifold but I would have to think your manifold is very rare today.


I hate to ask but I wonder if a Swan develops the same foible as the factory design i.e drooping at the end.
ericr is offline   Reply With Quote
Old 01-01-2019, 01:54 PM   #6
Brian in Wheeling
Senior Member
 
Brian in Wheeling's Avatar
 
Join Date: May 2010
Location: Wheeling, WV - U.S.A.
Posts: 241
Default Re: Running engine with a Simmons Swan Manifold

Sponsored Links (Register now to hide all advertisements)
The droop was with the exhaust manifolds, which were later made stronger in the vulnerable area. His Simmons Swan is an intake.
Brian
Brian in Wheeling is offline   Reply With Quote
Old 01-01-2019, 02:25 PM   #7
Bob-A
Senior Member
 
Bob-A's Avatar
 
Join Date: May 2010
Location: Central FL, USA
Posts: 1,136
Smile Re: Running engine with a Simmons Swan Manifold

Pictured is the Simmon's Swan Manifold on my '29 roadster. Not long after I
attached the manifold along with a Simmon's carb, not pictured here. The gas tank developed a leak on the roadster. I repaired the leak and some other problems on the car about 3 years ago. However, I have yet to make
the car road worthy again. The short time I ran the Simmon's intake and carb together. Was not enough to dial the carb in and detect any performance increase in the motor. I also have a second Swan Manifold
that I may install on my '31 roadster along with a Simmon's "side-bowl"
carb.


Joop, Was it a timing problem you had that you emailed me about?


Bob-A
Attached Images
File Type: jpg F6D84DBD.jpg (85.1 KB, 207 views)
Bob-A is offline   Reply With Quote
Old 03-24-2019, 01:49 PM   #8
jim1932
Senior Member
 
jim1932's Avatar
 
Join Date: Oct 2010
Location: Hancock, MA
Posts: 2,776
Default Re: Running engine with a Simmons Swan Manifold

Getting ready to put mine on my Model B, Along with the Simmons head. Is the carb casket the same as a model A Zenith? Mine has seen better days.

Curious as to what color people see? Only photo I ever saw was a museum and it looked like a John Deere green.
__________________
Short URL: http://smu.gs/14g7eDW
jim1932 is offline   Reply With Quote
Old 03-24-2019, 04:56 PM   #9
Synchro909
Senior Member
 
Synchro909's Avatar
 
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,471
Default Re: Running engine with a Simmons Swan Manifold

The sight of these manifolds reminds me of the most recent engine I built. I made a manifold with square section to take a down draft carburetor. On one of my other cars, I want to fit a B carb that I have rebuilt but it won't fit. The steering box is in the way. I would have to raise it by about 1/2" but then the choke rod wouldn't line up. To get around this, I could use a cable for the choke and maybe a speedo type cable (for torsion) for the GAV. Another option might be to put a couple of small universal joints in the rod to allow for the misalignment. It all starts to get messy. I'd rather not go to a downdraft on this car.
Has anybody ever seen a side draft carburetor used on a Model A? SU maybe?
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood.
Synchro909 is offline   Reply With Quote
Old 03-25-2019, 08:23 AM   #10
Railcarmover
BANNED
 
Join Date: Apr 2017
Location: Sacramento
Posts: 1,262
Default Re: Running engine with a Simmons Swan Manifold

Hotrodders,the lot of ya are hotrodders . Any improvement in carburetion is money well spent,the biggest bang for the buck is in fuel and compression for a model a..
Railcarmover is offline   Reply With Quote
Old 03-25-2019, 01:43 PM   #11
gz
Senior Member
 
gz's Avatar
 
Join Date: May 2010
Posts: 1,664
Default Re: Running engine with a Simmons Swan Manifold

I had a Simmons intake manifold, like the one pictured, on my coupe.
The noticeable difference was in cold (20-50 degrees) weather. With the Simmons intake, there was hardly any warm up time required and hardly any "fiddling" with the GAV. In warmer temperatures, I could see very little difference from the stock intake.
gz is offline   Reply With Quote
Old 03-25-2019, 03:51 PM   #12
John Stone
Senior Member
 
John Stone's Avatar
 
Join Date: May 2010
Location: Wichita, Kansas
Posts: 710
Default Re: Running engine with a Simmons Swan Manifold

Just finished installing the Simmons Swam manifold I've had for many years. Several weeks ago I got a side bowl carburetor. It idles just fine but haven't gone for a test drive. That will be tomorrow.

Also installed a heater manifold that does not require cutting a hole in the firewall. Hated to do that to my A400. Just have to cut up the $300 carpet.

Here are a couple picture showing the installation with the heater cover off and on. Been a challenge getting the duct work just right under the floorboard. Got my exercise getting up and down. Hope I'm not too sore to get in the car to drive it.
Attached Images
File Type: jpg DSCN4744.jpg (72.8 KB, 82 views)
File Type: jpg DSCN4745.jpg (61.4 KB, 68 views)
John Stone is offline   Reply With Quote
Old 03-25-2019, 10:29 PM   #13
jetmek
Senior Member
 
Join Date: May 2010
Location: albany
Posts: 462
Default Re: Running engine with a Simmons Swan Manifold

Interesting to hear if it runs any different than stock. Ive got one of those hanging on the wall and also a Bendix down draft setup that might be fun to tinker with...
__________________
engine and component overhauls my specialty!
Website- www.godevilgarage.com
jetmek is offline   Reply With Quote
Old 03-26-2019, 10:52 AM   #14
John Stone
Senior Member
 
John Stone's Avatar
 
Join Date: May 2010
Location: Wichita, Kansas
Posts: 710
Default Re: Running engine with a Simmons Swan Manifold

Just got back from a short test drive. I was amazed that the performance seemed to be improved. The A400 has a Snyder head but being heavier never performed like my light weight 29 roadster. Now it seems a lot closer. Remember, the operative word in the last statements is "seemed".
John Stone is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:26 AM.