Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-28-2014, 06:25 PM   #1
[email protected]
Senior Member
 
modela@aol.com's Avatar
 
Join Date: Aug 2011
Location: Illinois
Posts: 730
Default Radiator repair with two part putty

image.jpgDriving back home on the pot hole infested Illinois roads back from the French Lick MARC meet I was getting a bigger and bigger coolant leak messing up the engine compartment coming from the top tank of the radiator. It was causing missing from wetting the spark plugs as well. One of the travelling guys with me finally noticed that the hood rod bracket had actually broken away from the top radiator tank. The same guy also had a radiator leak on his drive down to the National meet in Texas years ago and he recommended to fix it temporarily with two part epoxy putty stick. Just roll it to get it to activate it and apply. It did the job to get me down the road to home over hundreds of miles. One package of this epoxy putty will now be part of my traveling bag of "on the road" repair items...

We are home now all safe and sound. Great trip, great time at French Lick.....
16002us.jpg

Last edited by [email protected]; 06-28-2014 at 06:39 PM. Reason: Added picture
modela@aol.com is offline   Reply With Quote
Old 06-28-2014, 07:47 PM   #2
neds29
Senior Member
 
Join Date: Nov 2013
Location: Ahwatukee, AZ
Posts: 115
Default Re: Radiator repair with two part putty

Wow, good idea. I'll add it to mine too. Thanks. Ned
__________________
Retired civil engineer.
Winters in Phoenix, summers in Ipswich, Mass. and North Dakota.
'29 closed cab pickup- Excellent AZ truck.
'29 roadster- Owned for 21 years but now sold.
'28 CC pickup- My first car in Andover, MA back in '62- '63.
neds29 is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 06-28-2014, 08:58 PM   #3
H. L. Chauvin
Senior Member
 
Join Date: May 2010
Posts: 4,179
Default Re: Radiator repair with two part putty

Sponsored Links (Register now to hide all advertisements)
Hi,

FWIW:

Thanks for this information & your experience -- it can help someone in the future with a similar problem.

About 35 years ago I had an old used, yellow Sears Cub Cadet riding lawn mower that a friend "gave" me after he bought a new lawn mower.

When I got it, the centered soldered lap joint on the entire perimeter of this thick steel gas tank was leaking on the bottom, so I went to our then local TG&Y Store with this leaking tank to look for any type of, or brand of new replacement lawn mower gas tank.

The TG&Y manager pulled a similar stick of (2) part grey steel epoxy off of the wall, told me to clean the gas tank's perimeter joint & apply a thin layer of this epoxy on the entire length of the joint -- he then added, that if it did not work & seal the leak, he would give me all of the merchandise he had on display in the store. LOL

About ten (10)) years later, with lots of gas tank vibrations, I gave it to another neighbor who kept it for about another 10 years, & after 20 years this tank joint still did not leak.

Sometimes, many of us senior citizens do not always trust new epoxies too much; but if ever in doubt, just consult with a modern Dentist about new synthetic materials & glues used today in modern Dentistry.
H. L. Chauvin is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:23 AM.