The Ford Barn

zoegrant · 11-09-2019, 09:58 AM

Does any company make a two barrel carb spacer with a PCV port ??

Anteek29 · 11-09-2019, 10:23 AM

If not, should be easy to make?

KULTULZ · 11-09-2019, 10:58 AM

Quote:

Originally Posted by zoegrant

Does any company make a two barrel carb spacer with a PCV port ??

What year and carb style? You are upgrading?

streetdreams · 11-09-2019, 04:00 PM

if you're using a 2100 Ford 2 bbl, just about any mid to late '60s 302 or 351W has what you want

5851a · 11-09-2019, 05:27 PM

If you go past 1972 generally you will find it will have a egr valve attached.

paul2748 · 11-09-2019, 09:29 PM

Sponsored Links (Register now to hide all advertisements)

I have seen them advertised, but don't remember the vendor.

Hot Rod Reverend · 11-10-2019, 02:23 PM

Check speedway automotive for the Stromberg style 2 barrels (3 bolt mounting bases) - they should have different heights. Also... and I hate to say it, ebay.

https://www.ebay.com/itm/For-Strombe...AAAOxydB1Si8re

poolplayer1 · 11-11-2019, 11:32 AM

Go to Ebay and in the search bar, type in C4AE-9A589-D and take a look at that spacer.Might be what you are looking for.

zoegrant · 11-11-2019, 02:14 PM

I need a 3 bolt mounting base not the 4 bolt...please let me know is someone runs across a supplier...thanks

40cpe · 11-11-2019, 05:05 PM

Here you go:

https://www.jalopyjournal.com/forum/...carbs.1172600/

KULTULZ · 11-11-2019, 06:14 PM

Quote:

Originally Posted by 40cpe

Here you go:

https://www.jalopyjournal.com/forum/threads/3-carburetor-spacers-1-with-vacuum-port-2-beveled-for-stromberg-type-carbs.11726/

Perfect.

Too bad the vendor wasn't listed. Should also consider a phenolic spacer between the carb spacer and carb body.

zoegrant · 11-11-2019, 06:15 PM

40cpe... the spacer on the left, does that have a port for a pcv hose ?
How large an opening is needed for a pcv hose. Looks like a small diameter...thanks for finding this for me. Who is the vendor ?

paul2748 · 11-11-2019, 08:29 PM

The seller looks to be a HAMB member (2900 plus posts). It looks like you will have to get a screw in nipple to attach a hose. Contact the seller for info if you are a HAMB member

Quote:

Originally Posted by zoegrant

40cpe... the spacer on the left, does that have a port for a pcv hose ?
How large an opening is needed for a pcv hose. Looks like a small diameter...thanks for finding this for me. Who is the vendor ?

40cpe · 11-11-2019, 08:57 PM

Quote:

Originally Posted by zoegrant

40cpe... the spacer on the left, does that have a port for a pcv hose ?
How large an opening is needed for a pcv hose. Looks like a small diameter...thanks for finding this for me. Who is the vendor ?

Click on the HAMB link. You will have to ask those questions to the seller.

Neal · 11-12-2019, 07:33 AM

Don't the gas heaters (southwinds) have what you are looking for? I do not know if the port is the correct size.

The picture above looks like one.

11-09-2019, 09:58 AM	#1
zoegrant Senior Member Join Date: Jun 2010 Location: tolland CT Posts: 773	Two barrel card spacer with pcv Does any company make a two barrel carb spacer with a PCV port ??

11-09-2019, 10:23 AM	#2
Anteek29 Senior Member Join Date: Dec 2014 Location: Santa Maria, CA Posts: 985	Re: Two barrel card spacer with pcv If not, should be easy to make? __________________ Alan 1929 Special Coupe 1941 Pick-Up 1955 Victoria

11-09-2019, 04:00 PM	#4
streetdreams Senior Member Join Date: Dec 2010 Location: Howell, Michigan, USA, The Peoples Slightly Overspent Demodependancy of Michigan Posts: 638	Re: Two barrel card spacer with pcv if you're using a 2100 Ford 2 bbl, just about any mid to late '60s 302 or 351W has what you want

11-09-2019, 05:27 PM	#5
5851a Senior Member Join Date: Oct 2014 Location: NE Iowa Posts: 1,663	Re: Two barrel card spacer with pcv If you go past 1972 generally you will find it will have a egr valve attached.

11-09-2019, 09:29 PM	#6
paul2748 Senior Member Join Date: May 2010 Location: Midland Park, NJ Posts: 3,978	Re: Two barrel card spacer with pcv Sponsored Links (Register now to hide all advertisements) I have seen them advertised, but don't remember the vendor. __________________ 48 Ford Conv 56 Tbird 54 Ford Victoria

11-10-2019, 02:23 PM	#7
Hot Rod Reverend Senior Member Join Date: May 2010 Location: Lancaster, CA Posts: 916	Re: Two barrel card spacer with pcv Check speedway automotive for the Stromberg style 2 barrels (3 bolt mounting bases) - they should have different heights. Also... and I hate to say it, ebay. https://www.ebay.com/itm/For-Strombe...AAAOxydB1Si8re __________________ Lancaster, California Visit hotrodreverend.com to view hundreds of pictures and videos of the build of the 1955 Ford Club Sedan!

11-11-2019, 11:32 AM	#8
poolplayer1 Senior Member Join Date: Sep 2015 Posts: 399	Re: Two barrel card spacer with pcv Go to Ebay and in the search bar, type in C4AE-9A589-D and take a look at that spacer.Might be what you are looking for.

11-11-2019, 02:14 PM	#9
zoegrant Senior Member Join Date: Jun 2010 Location: tolland CT Posts: 773	Re: Two barrel card spacer with pcv I need a 3 bolt mounting base not the 4 bolt...please let me know is someone runs across a supplier...thanks

11-11-2019, 06:15 PM	#12
zoegrant Senior Member Join Date: Jun 2010 Location: tolland CT Posts: 773	Re: Two barrel card spacer with pcv 40cpe... the spacer on the left, does that have a port for a pcv hose ? How large an opening is needed for a pcv hose. Looks like a small diameter...thanks for finding this for me. Who is the vendor ?

11-12-2019, 07:33 AM	#15
Neal Senior Member Join Date: May 2010 Location: North Dakota Posts: 129	Re: Two barrel card spacer with pcv Don't the gas heaters (southwinds) have what you are looking for? I do not know if the port is the correct size. The picture above looks like one.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode