01-15-2018, 06:17 AM | #1 |
Senior Member
Join Date: May 2010
Location: Upland Ca
Posts: 274
|
Cabriolet
Does anyone know the thickness of the wood of a 29 Cabriolet? I’m talking about the frame wood that attaches to the body than to the metal frame.
Steve |
01-15-2018, 09:23 AM | #2 |
Senior Member
Join Date: Feb 2011
Location: NNNNNNNNJJJJJJJJJJ
Posts: 6,782
|
Re: Cabriolet
It varies but about 1 1/2 inches that gets a little thinner up in the front-if speaking of the sub rails.
|
Sponsored Links (Register now to hide all advertisements) |
|
01-15-2018, 12:29 PM | #3 |
Senior Member
Join Date: May 2010
Location: California
Posts: 977
|
Re: Cabriolet
From front to back it is
1 1/4" at 0" then 1 9/16" at 6 3/16" then 1 11/16" at 8 11/16" then 2" at 57 31/32" These dimensions are from the blue prints. It is a very complex piece of wood. The top of the wood is not flat in some areas. Bob |
01-15-2018, 01:41 PM | #4 |
Junior Member
Join Date: May 2010
Posts: 9
|
Re: Cabriolet
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|