The Ford Barn

H. L. Chauvin · 05-11-2016, 10:21 PM

Hi Michael,

As requested, Per # 15, just hurriedly posted how to adjust valve stems with non-adjustable tappets.

Bill Cilker · 05-16-2016, 10:43 AM

I would not recommend using the other cam gear, the 2 piece one. They come apart. I had one that lasted only 4,000 miles. The steel center separates from the outer section.

05-11-2016, 10:21 PM	#21
H. L. Chauvin Senior Member Join Date: May 2010 Posts: 4,179	Re: gypsycandle: update to the timing way off Hi Michael, As requested, Per # 15, just hurriedly posted how to adjust valve stems with non-adjustable tappets.

05-16-2016, 10:43 AM	#22
Bill Cilker Senior Member Join Date: Apr 2011 Location: Milpitas, CA Posts: 398	Re: gypsycandle: update to the timing way off I would not recommend using the other cam gear, the 2 piece one. They come apart. I had one that lasted only 4,000 miles. The steel center separates from the outer section. __________________ Bill Cilker, Jr Unrestored 190A Victoria 45B, 160B & 189A Victoria Association President

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode