07-08-2020, 01:01 PM | #21 |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,181
|
Re: drum puller
|
07-08-2020, 01:09 PM | #22 |
Senior Member
Join Date: Feb 2020
Location: BC Canada
Posts: 573
|
Re: drum puller
|
Sponsored Links (Register now to hide all advertisements) |
|
07-08-2020, 01:22 PM | #23 |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,181
|
Re: drum puller
I don't, sorry. I would check Ebay for vintage hub puller. That type tends to pop up more often.
|
07-09-2020, 06:57 AM | #24 |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,068
|
Re: drum puller
The one that I have is NOT a KR Wilson version, but picks up the groove and works really well. I can't remember who I bought it from (probably eBay, Ford Barn or the HAMB). Will take pictures late on and post . . .
|
07-09-2020, 08:23 AM | #25 |
Senior Member
Join Date: Jan 2012
Location: Lyman,ME.
Posts: 2,630
|
Re: drum puller
I opened mine last nite while my son was visiting. He’s a Tool and Die Maker at the ship yard in Kittery. He looked it over good and thought it was a real well made tool. Rugged, good quality materials and nice machining...... Mark
__________________
I'm thinkin' about crankin' My ragged ol' truck up and haulin' myself into town. Billy Joe Shaver |
07-09-2020, 09:40 AM | #26 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,307
|
Re: drum puller
Sponsored Links (Register now to hide all advertisements)
|
07-09-2020, 01:24 PM | #27 |
Senior Member
Join Date: May 2010
Posts: 2,173
|
Re: drum puller
Some folks have claimed this $18 HarborFreight tierod puller can also get the job done by filing the claws a bit to snug in the groove. Jack E/NJ
|
07-09-2020, 01:49 PM | #28 |
Senior Member
Join Date: Jun 2010
Location: Atlanta GA
Posts: 505
|
Re: drum puller
^^^^
That's ^^^^ what I've used in the past. works well enough I would love a "real" puller but it runs almost 10 times the cost for the above unit. I get the good one someday |
07-09-2020, 02:14 PM | #29 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,755
|
Re: drum puller
If I was going to try and use one like that one pictured above, I'd put a big G Clamp across it to help prevent the jaws from spreading apart.
Mart. |
07-09-2020, 04:12 PM | #30 |
Senior Member
Join Date: Jan 2012
Location: Lyman,ME.
Posts: 2,630
|
Re: drum puller
I hope it’s not made by the same company as their jackstands....... Mark
__________________
I'm thinkin' about crankin' My ragged ol' truck up and haulin' myself into town. Billy Joe Shaver |
07-09-2020, 04:29 PM | #31 | |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,645
|
Re: drum puller
Quote:
All these cheapo pullers can end up costing you an axle, a drum, or worse. Two points of contact guarantee it to wobble under the wrench, and that's when things start going south.
__________________
Alan |
|
07-09-2020, 04:46 PM | #32 |
Senior Member
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 2,651
|
Re: drum puller
Yep, The right tool for the right job. Just like getting out stuck flat head valves you can spend hours fighting them or get the right tool and do it in less than an hour.
|
07-09-2020, 05:01 PM | #33 |
Senior Member
Join Date: Dec 2013
Location: Waxahachie, Texas
Posts: 949
|
Re: drum puller
Then there's this bad boy made by Blue Point. My Dad found this at a garage sale or auction several years ago and it's a beast - probably weighs around 10 pounds! Had to modify it slightly, but it will fit Model A & early V8 hubs nicely. Grips with incredible leverage and applies pressure squarely on the end of the axle stub.
|
07-09-2020, 05:45 PM | #34 |
Senior Member
Join Date: May 2010
Location: so cal, placerville, vegas
Posts: 1,394
|
Re: drum puller
Home made, obviously copied from 'somewhere', works good
|
07-09-2020, 06:04 PM | #35 |
Senior Member
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 2,651
|
Re: drum puller
That’s well made! How did you machine out the recess? On a Mill?
|
07-10-2020, 12:16 AM | #36 |
Senior Member
Join Date: Feb 2020
Location: Hayward,CA
Posts: 513
|
Re: drum puller
I bought one from Precision I think on eBay. Was a few years ago. Nice folks, made well works great.
Back in the days (early to mid fifties) we put the opposite wheel on a starter or generator, put the weight of the car on the wheels, put the nut flush with the end of the axle and whacked it with a sledge hammer. Hopefully the wheel would stay right there but the rear end of the car would roll on the old round thing under the opposite wheel. Always worked. The dealer mechanics taught me that. There was also a special nut you could buy to put on the axle for hammering on. |
07-11-2020, 06:14 AM | #37 |
Senior Member
Join Date: May 2010
Location: Meredith, N.H.
Posts: 766
|
Re: drum puller
deuce lover, I wondered how long it would be before someone posted a picture of your puller. I also have the same one which my dad used and somehow I managed to hang on to it. On a tough pull, an impact socket lightly used works wonders !
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|