The Ford Barn

asapguy · 08-22-2017, 10:46 AM

Sponsored Links (Register now to hide all advertisements)

36 LB motor for rebuild. This eng. ran smooth & whisper quite when removed about 10yrs. ago from a beautifully restored 35 Ford. It had NOS cast iron heads installed about two yrs. earlier. It did overheat & had water in the oil so it was replaced with a 40 flathead. It has LB stamped on the flat surface where the intake manifold bolts to.
I also have several 32-36 distributors & coils including one rebuilt still in the box & a genuine NOS Ford coil in the Ford box. These I would sell separately if interested. Have picture if interested, must be picked up, no shipping. Thanks, Perry

08-22-2017, 10:46 AM	#1
asapguy Senior Member Join Date: May 2010 Location: Snohomish Wa. Posts: 389	1936 21 stud LB motor City: Snohomish State: Wa Price: $400 Sponsored Links (Register now to hide all advertisements) 36 LB motor for rebuild. This eng. ran smooth & whisper quite when removed about 10yrs. ago from a beautifully restored 35 Ford. It had NOS cast iron heads installed about two yrs. earlier. It did overheat & had water in the oil so it was replaced with a 40 flathead. It has LB stamped on the flat surface where the intake manifold bolts to. I also have several 32-36 distributors & coils including one rebuilt still in the box & a genuine NOS Ford coil in the Ford box. These I would sell separately if interested. Have picture if interested, must be picked up, no shipping. Thanks, Perry Last edited by asapguy; 08-22-2017 at 11:06 AM.