Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 09-15-2021, 07:22 AM   #1
CatMan1
Senior Member
 
Join Date: Jun 2021
Location: Pella, IA
Posts: 326
Default Wrong Gear Oil?

I think I read somewhere that if too light of a gear oil is added to the transmission/rear end it will cause it to leak. Is that true? I know both of mine are. It's light enough that it can drip off my finger and it's kind of dark. Also, what difference, if any, would it make in shifting?
CatMan1 is offline   Reply With Quote
Old 09-15-2021, 08:00 AM   #2
LeonardS
Senior Member
 
Join Date: May 2010
Location: Jamestown, ND
Posts: 651
Default Re: Wrong Gear Oil?

I use Texaco Meropa 680. It comes in 5 gallon buckets and I bought it from one of the oil suppliers in Des Moines when I lived in Iowa.
LeonardS is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 09-15-2021, 08:10 AM   #3
CatMan1
Senior Member
 
Join Date: Jun 2021
Location: Pella, IA
Posts: 326
Default Re: Wrong Gear Oil?

Quote:
Originally Posted by LeonardS View Post
I use Texaco Meropa 680. It comes in 5 gallon buckets and I bought it from one of the oil suppliers in Des Moines when I lived in Iowa.

Well, I do live 40 miles from there.......
CatMan1 is offline   Reply With Quote
Old 09-15-2021, 08:16 AM   #4
Patrick L.
Senior Member
 
Patrick L.'s Avatar
 
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
Default Re: Wrong Gear Oil?

Its easy enough to change it and not worry about it.

I don't see any difference between 140w and 250w. Its available at Restoration Supply Co. The Meropa should be just fine also.

From what I understand the 600W available today is doctored up 140w.

Is the transmitter actually leaking, or, is it the u-joint clamshell ?
Patrick L. is offline   Reply With Quote
Old 09-15-2021, 08:21 AM   #5
CatMan1
Senior Member
 
Join Date: Jun 2021
Location: Pella, IA
Posts: 326
Default Re: Wrong Gear Oil?

Quote:
Originally Posted by Patrick L. View Post
Its easy enough to change it and not worry about it.

I don't see any difference between 140w and 250w. Its available at Restoration Supply Co. The Meropa should be just fine also.

From what I understand the 600W available today is doctored up 140w.

Is the transmitter actually leaking, or, is it the u-joint clamshell ?

I haven't checked that close yet. Too many other issues. I think it was on the bottom of the transmission.
CatMan1 is offline   Reply With Quote
Old 09-15-2021, 10:51 AM   #6
Ruth
Senior Member
 
Join Date: May 2016
Location: Glide, Oregon
Posts: 1,334
Default Re: Wrong Gear Oil?

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by CatMan1 View Post
I haven't checked that close yet. Too many other issues. I think it was on the bottom of the transmission.
Probably leaking from the reverse idler and cluster gear shafts. The vendors have a kit that stops that annoying leak. https://www.snydersantiqueauto.com/P...earchByKeyword

Replacement shafts have a 'o' ring.
__________________
Ruth
"Sometimes you really DO need to read the whole thread"

Last edited by Ruth; 09-15-2021 at 06:28 PM.
Ruth is offline   Reply With Quote
Old 09-15-2021, 03:26 PM   #7
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,371
Default Re: Wrong Gear Oil?

The recommended lubricants are dictated by the manufacturer. Outdated lubricate grade ratings generally always have a modern equivalent. Seal technology back in the early automotive era was not as good as it is today but it kept the majority of the lubricant inside where it belongs. It's after the seals deteriorate and clearances wear when it gets harder to keep the lube in. Renew the seals and seal up any clearance gaps and the units should still hold their mud.
rotorwrench is offline   Reply With Quote
Old 09-15-2021, 04:02 PM   #8
Oldbluoval
Senior Member
 
Oldbluoval's Avatar
 
Join Date: Jun 2015
Location: Signal Mtn, TN (SE TN)
Posts: 2,360
Default Re: Wrong Gear Oil?

Another issue is that the A tranny in not synchronized. The heavy dope helps the shifting process. I’ve not tried thinner oil but would think leaking would also be an issue.
Oldbluoval is online now   Reply With Quote
Old 09-15-2021, 07:28 PM   #9
nkaminar
Senior Member
 
nkaminar's Avatar
 
Join Date: Jan 2012
Location: Western North Carolina
Posts: 3,820
Default Re: Wrong Gear Oil?

Mitchell recommends 85W-140 GL5 gear oil for their transmissions and overdrives for the Model A. Oils have come a long way in 90 years and the modern oils have additives to maintain the oil film under pressure. The 85W-140 is fairly thick oil. I use it in my transmission and rear end.

If the transmission is too full it will leak. New gaskets and seals will stop leaks.
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
nkaminar is offline   Reply With Quote
Old 09-15-2021, 11:17 PM   #10
eagle
Senior Member
 
eagle's Avatar
 
Join Date: Aug 2011
Location: Eagle Bend, MN
Posts: 2,025
Default Re: Wrong Gear Oil?

My experience: I have used Lucas Oil Stabilizer in my A transmission for years. Makes the shifter silky smooth. The "600W" oil I got from the vendors was not good. Try it yourself, Stopped the oil drip on mine too.
__________________
"There are some that can destroy an anvil with a teaspoon and shouldn't be allowed to touch anything resembling a tool."
eagle is offline   Reply With Quote
Old 09-16-2021, 09:36 AM   #11
Chris in WNC
Senior Member
 
Chris in WNC's Avatar
 
Join Date: May 2010
Location: Spruce Pine, NC
Posts: 1,458
Default Re: Wrong Gear Oil?

I have used straight STP in transmission/differential/steering box for the last 15-20 years.
Many miles and no problems.
__________________
our next Model A is out there in the unknown......
Chris in WNC is offline   Reply With Quote
Old 09-16-2021, 11:04 AM   #12
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,371
Default Re: Wrong Gear Oil?

I'll bet it takes a while to change out that STP viscosity builder product. Straight SAE 250 would be easier to change than that stuff.
rotorwrench is offline   Reply With Quote
Old 09-16-2021, 06:40 PM   #13
Synchro909
Senior Member
 
Synchro909's Avatar
 
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,472
Default Re: Wrong Gear Oil?

A thin gear oil will make gear changing more difficult to do silently IMO.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood.
Synchro909 is offline   Reply With Quote
Old 09-16-2021, 07:41 PM   #14
Crankster
Senior Member
 
Crankster's Avatar
 
Join Date: Oct 2017
Posts: 563
Default Re: Wrong Gear Oil?

One thing to keep in mind when reading lubricant specifications, Gear Oil numbers are different than SAE Oil numbers for equivalents, and I think the old 600W, SAE 50, and 90W Gear Oil are all pretty close in terms of viscosity.
Crankster is offline   Reply With Quote
Old 09-17-2021, 08:23 AM   #15
Patrick L.
Senior Member
 
Patrick L.'s Avatar
 
Join Date: May 2010
Location: Largo Florida
Posts: 7,225
Default Re: Wrong Gear Oil?

Quote:
Originally Posted by Crankster View Post
One thing to keep in mind when reading lubricant specifications, Gear Oil numbers are different than SAE Oil numbers for equivalents, and I think the old 600W, SAE 50, and 90W Gear Oil are all pretty close in terms of viscosity.




600W is more in line with 180-240W. 140 and 250 work fine as stated. 90 is to light. This is discussed very often here.
Patrick L. is offline   Reply With Quote
Old 09-17-2021, 08:32 AM   #16
Bob Bidonde
Senior Member
 
Bob Bidonde's Avatar
 
Join Date: May 2010
Location: Long Island, NY
Posts: 3,432
Default Re: Wrong Gear Oil?

I have been running SAE high pressure gear oils since 1962, and recently I use 75W140 GL5 synthetic blend. In fact, gear shifting is not difficult! I always double clutch to avoid grinding the gears.
__________________
Bob Bidonde
Bob Bidonde is offline   Reply With Quote
Old 09-17-2021, 10:54 AM   #17
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,371
Default Re: Wrong Gear Oil?

The Society of Automotive Engineers had different systems for grading viscosity standards between motor oil and gear lubricant products. SAE 50 motor oil is in the same viscosity range as SAE 90 gear lubricant. The API is also part of the current rating system. All are still SAE or ISO rated but the type of lubricant has to be included to tell what the rating is for. Motor oils used ZDDP for tappet protection but gear lubes have extra pressure or EP additives designed for gears for an EP rating in similar fashion as grease products but grease products have there own ratings and extra pressure additive packages so they are all in their own separate categories. ATF & Hydraulic fluid are also in different categories.

The SAE is still used in the US but the International Standard Organization or ISO still takes precedence in the modern era.
rotorwrench is offline   Reply With Quote
Old 09-18-2021, 09:06 AM   #18
Chris in WNC
Senior Member
 
Chris in WNC's Avatar
 
Join Date: May 2010
Location: Spruce Pine, NC
Posts: 1,458
Default Re: Wrong Gear Oil?

when changing the STP in trans and diff, I just open the drain plugs and come back a few days later......
steering box does not get changed, just topped off as needed.
__________________
our next Model A is out there in the unknown......
Chris in WNC is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:43 AM.