Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-26-2021, 05:04 PM   #1
Thearne3
Member
 
Join Date: Aug 2020
Location: Redding, CT
Posts: 39
Default '29 Phaeton Folded Top Support Posts

The top support rods that come out of the rear quarter of each side of the body are loose. The passenger side is very loose!

I moved the rear seat and side panel out of the way and discovered that the nut in the bracket was not in place. https://photos.app.goo.gl/22zKPjyZQMr9kwda6

The next photo shows the nut in place. https://photos.app.goo.gl/8mV7cxiRPuSFXmrs9

It's not clear how the nut was held in place - tack weld? I need suggestions on how to fix the nut in place. The bracket that it is in is tack welded to the body in one place and otherwise held by several nuts and bolts in the wood supports.

I can probably break the weld and remove the bracket for repair, but would prefer to leave it in place for the repair.

What do you think?

Last edited by Thearne3; 07-26-2021 at 05:09 PM.
Thearne3 is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:17 AM.