signal stat 900 question

[Jimczeb]

I just purchased a Signal Stat 900 used. I think the moded is 25-00101.

I have looked everywhere but cannot find a wiring diagram that matches the configuration or the wire colors that match the unit i have. Can anyone help?
Find attached a picture of the unit.
Jim Czebiniak

[Brentwood Bob]

https://www.truck-lite.com/amfile/fi...product/25741/
Try this.

[Banditorama]

I have the signal stat 600 on mine, I'm not sure if they're wired the same or not. But, on mine all the wires had tags with letters on them. I have the function of each wire letter written down in my notes in my garage. When I get home from work I can dig them out and put up what I have if yours are labeled that way too

[mcgarrett]

It looks like someone might have replaced the wires based on the colors shown on you photo. You might give this a try...

https://www.ford-trucks.com/forums/a...1&d=1185027535

[JayJay]

Attached are the instructions from Snyders for the Signal-Stat that they sell. I would think that they would be close enough to get you in the neighborhood.


Also a diagram I found using the search "Signal Stat 900 wiring diagram", there are a bunch out there.

[todd j]

Sponsored Links (Register now to hide all advertisements)

Maybe this will help

https://www.fordbarn.com/forum/attac...4&d=1710258738

[Banditorama]

On the 600:
Yellow/black: + to stalk light
B: ground to stalk light
C: - Left signal
D: + to turn signals
F: - Right signal

From the looks of it, I'd say the 600 is different though