The Ford Barn

reagen · 03-26-2021, 10:02 AM

does any one know how to make, Fabricated 1935 grille bars,teeth,slats or what ever you want to call them thanks

rockfla · 03-26-2021, 10:48 AM

That would be a tough task.....I would think finding a beater and "cut & Paste" method would be a hell of a lot easier!!! AND A "really" good TIG welder (person) IMO

Vics Stuff · 03-26-2021, 11:08 AM

Quote:

Originally Posted by rockfla

That would be a tough task.....I would think finding a beater and "cut & Paste" method would be a hell of a lot easier!!! AND A "really" good TIG welder (person) IMO

I would agree there . Unless a guy has access to some type of tooling methods . Manufacturing the bars will be a lot of work. .
Vic

cmbrucew · 03-26-2021, 11:43 AM

Hard wood board, router and dremel. Once you get good you could sell them here.
Bruce

mercman from oz · 03-26-2021, 04:57 PM

It would take a very skilled workman to recreate these grille bars/slats for the 1935 Ford Grilles.

deuce lover · 03-27-2021, 12:28 AM

Sponsored Links (Register now to hide all advertisements)

Back in the 90's Vintique used to sell ones that were repoped in Australia.They imported them in raw metal and had them chromed in Orange County,CA.They around $1100 and looked good.Almost bought one as I had a '35 roadster then.

03-26-2021, 10:02 AM	#1
reagen Member Join Date: Feb 2011 Location: north,royalton ohio Posts: 84	35 ford grille does any one know how to make, Fabricated 1935 grille bars,teeth,slats or what ever you want to call them thanks

03-26-2021, 10:48 AM	#2
rockfla Senior Member Join Date: Mar 2014 Location: Jacksonville FL Posts: 3,950	Re: 35 ford grille That would be a tough task.....I would think finding a beater and "cut & Paste" method would be a hell of a lot easier!!! AND A "really" good TIG welder (person) IMO

03-26-2021, 11:43 AM	#4
cmbrucew Senior Member Join Date: Dec 2010 Location: North of sandy ago, CA. Posts: 2,064	Re: 35 ford grille Hard wood board, router and dremel. Once you get good you could sell them here. Bruce __________________ Works good Lasts long time

03-26-2021, 04:57 PM	#5
mercman from oz Senior Member Join Date: May 2012 Location: Queensland, Australia Posts: 10,361	Re: 35 ford grille It would take a very skilled workman to recreate these grille bars/slats for the 1935 Ford Grilles.

03-27-2021, 12:28 AM	#6
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,305	Re: 35 ford grille Sponsored Links (Register now to hide all advertisements) Back in the 90's Vintique used to sell ones that were repoped in Australia.They imported them in raw metal and had them chromed in Orange County,CA.They around $1100 and looked good.Almost bought one as I had a '35 roadster then.