|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-07-2016, 04:11 PM | #1 |
Senior Member
Join Date: May 2010
Location: Camino, CA.
Posts: 3,086
|
clutch pedal return spring
I'm reassembling the clutch pedal on my AR tudor. What's the easy way to reinstall the pedal return spring?
|
11-07-2016, 11:27 PM | #2 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 3,131
|
Re: clutch pedal return spring
I believe Glenn is talking about the spring that is used at the clutch pedal of a car with a multiple-disk transmission installed. The spring is only used on these early cars. Glenn's 28 Tudor is an early AR car. As far as I know the spring is only available from Bratton's. See page 54, part number 11390.
I have rebuilt a number of Multi-disk clutch assembly's, but have never installed this spring on a car, therefore I am of no help. Someone out there who has done this before may be of help. Tom Endy |
Sponsored Links (Register now to hide all advertisements) |
|
11-08-2016, 06:42 AM | #3 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: clutch pedal return spring
AA trucks used a similar spring on the pedal. I helped restore a 1930 AA but don't recall how I did the spring, so it must have gone on with no problem. Right now I can't even picture what the other end of the spring hooked to.
|
11-08-2016, 08:02 AM | #4 |
Senior Member
Join Date: May 2010
Location: NC
Posts: 2,975
|
Re: clutch pedal return spring
Sponsored Links (Register now to hide all advertisements)
Last edited by George Miller; 11-08-2016 at 09:56 AM. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|