The Ford Barn

Patrick L. · 09-25-2019, 12:57 PM

If you have power to the cut-out terminal and used it to power up the generator, then if it was good it should try to motor. If it doesn't try then it probably has a problem like Ryan said.

walkerlakeprinter · 09-27-2019, 04:16 PM

I replaced my generator with a rebuilt one. I also installed a new semi-conductor cut-out. Everything works now.

09-25-2019, 12:57 PM	#21
Patrick L. Senior Member Join Date: May 2010 Location: Largo Florida Posts: 7,225	Re: Repolarize generator If you have power to the cut-out terminal and used it to power up the generator, then if it was good it should try to motor. If it doesn't try then it probably has a problem like Ryan said.

09-27-2019, 04:16 PM	#22
walkerlakeprinter Senior Member Join Date: May 2010 Location: Walker Lake, Nevada Posts: 304	Re: Repolarize generator I replaced my generator with a rebuilt one. I also installed a new semi-conductor cut-out. Everything works now.