Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-28-2018, 11:01 AM   #1
GPierce
Senior Member
 
GPierce's Avatar
 
Join Date: Dec 2014
Location: Germantown,TN
Posts: 520
Default Fuel Filter

I have had a problem with fine particles of rust passing thru the Tank standup screen and the screen in the sediment bulb and into the carb.
Most of the fine junk stays in the bottom of the sediment bulb. I though all of it did until I started have engine stalling problems. Removing the Carb I found the same small particles in the float bowl and the GAV valve bore.


I found this filter at NAPA; part-number 3039. It fits in the recess at the top of the glass bulb and is held in place with the bulb gasket. I removed the sediment bulb screen. All the fuel is now filtered by the paper filter. I bought three of them and carry one with me in the truck. Snyders and Bratton's also carry this filter and theirs includes the gasket.


https://www.napaonline.com/en/p/FIL3039
Attached Images
File Type: jpg Fuel Filter.jpg (30.9 KB, 39 views)
File Type: jpg IMG_1946.jpg (40.9 KB, 42 views)
File Type: jpg IMG_1947.jpg (60.6 KB, 37 views)
File Type: jpg IMG_1948.jpg (71.9 KB, 34 views)

Last edited by GPierce; 05-28-2018 at 12:17 PM.
GPierce is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:05 AM.