The Ford Barn

t42 · 07-22-2011, 11:02 PM

Does anyone have any recommendations for good quality engine/transmission rebuilders in the MN. area. I had a few names, but the file got misplaced.

Thanks in advance.
Skip

Farmallcub49 · 07-23-2011, 08:03 AM

I have done 7 so far, 4 in the last 6 months, with no complaints. I currently have 3 to do this winter, but could squeeze you in.

Andy

J and M Machine · 07-23-2011, 01:48 PM

Hello Skip: We aren't from MN but recently have done two engines from the same customer in Zumbrota,MN if you email me I can give you his phone number and name and you can talk to him about it. The shipping is very reasonable.
We are also the makers of the new transmission drums/crankshaft pulleys.
http://www.jandm-machine.com/project...ianModelT.html

vwbrian · 07-24-2011, 06:03 PM

Adam's Antique has done many, many engines! I can vouch for him. He is in Oconomowoc, WI. 1-262-719-0758. I built my engine with Adam watching over my shoulder and was amazed at how critical he is in rebuilding model T's. He's a very knowledgeable guy.
Tell him Brian sent you.

[email protected] · 07-24-2011, 11:41 PM

Skip,
Farmallcub49 is close to you and is more than capable of doing a good job on your engine and transmission. and I'm sure he'll be more than fair on cost. He's got experience and comes with good references. Get ahold of the guys in the T-totalers. I'm pretty sure they'll vouch for him.
Mike

t42 · 07-25-2011, 05:45 PM

Sponsored Links (Register now to hide all advertisements)

Great response. Thank you all for the info. I will look into this in a week or so.

Skip

James Rogers · 08-04-2011, 06:01 PM

I am a little faraway but do A's and T's all the time and have no comebacks. We also do T trannys.

http://www.model-a-ford-4bangers.com/

07-22-2011, 11:02 PM	#1
t42 Senior Member Join Date: Jun 2010 Location: MN. Posts: 253	Engine and tranny rebuilders Does anyone have any recommendations for good quality engine/transmission rebuilders in the MN. area. I had a few names, but the file got misplaced. Thanks in advance. Skip

07-23-2011, 08:03 AM	#2
Farmallcub49 Senior Member Join Date: Jan 2011 Location: St Joseph,MN Posts: 278	Re: Engine and tranny rebuilders I have done 7 so far, 4 in the last 6 months, with no complaints. I currently have 3 to do this winter, but could squeeze you in. Andy __________________ 'OSO HANDY RESTORATIONS Specializing in Model T Fords 320-293-1953

07-23-2011, 01:48 PM	#3
J and M Machine Senior Member Join Date: Oct 2010 Location: 40 Mt.Vickery Rd. Southborough,MA 508-460-0733 Posts: 352	Re: Engine and tranny rebuilders Hello Skip: We aren't from MN but recently have done two engines from the same customer in Zumbrota,MN if you email me I can give you his phone number and name and you can talk to him about it. The shipping is very reasonable. We are also the makers of the new transmission drums/crankshaft pulleys. http://www.jandm-machine.com/project...ianModelT.html

07-24-2011, 06:03 PM	#4
vwbrian Junior Member Join Date: Jun 2011 Location: Watertown, WI Posts: 16	Re: Engine and tranny rebuilders Adam's Antique has done many, many engines! I can vouch for him. He is in Oconomowoc, WI. 1-262-719-0758. I built my engine with Adam watching over my shoulder and was amazed at how critical he is in rebuilding model T's. He's a very knowledgeable guy. Tell him Brian sent you.

07-24-2011, 11:41 PM	#5
[email protected] Senior Member Join Date: Aug 2010 Posts: 937	Re: Engine and tranny rebuilders Skip, Farmallcub49 is close to you and is more than capable of doing a good job on your engine and transmission. and I'm sure he'll be more than fair on cost. He's got experience and comes with good references. Get ahold of the guys in the T-totalers. I'm pretty sure they'll vouch for him. Mike __________________ It's 110 miles to Chicago We've got half a pack of cigarettes It's dark And we're wearing sunglasses Let's go.

07-25-2011, 05:45 PM	#6
t42 Senior Member Join Date: Jun 2010 Location: MN. Posts: 253	Re: Engine and tranny rebuilders Sponsored Links (Register now to hide all advertisements) Great response. Thank you all for the info. I will look into this in a week or so. Skip

08-04-2011, 06:01 PM	#7
James Rogers Senior Member Join Date: May 2010 Location: Asheville,NC Posts: 3,104	Re: Engine and tranny rebuilders I am a little faraway but do A's and T's all the time and have no comebacks. We also do T trannys. http://www.model-a-ford-4bangers.com/