|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-12-2019, 02:58 PM | #1 |
Member
Join Date: Dec 2012
Location: northwest indiana
Posts: 40
|
project 1934 deluxe coupe
Hi everyone, this is the project i am up against. I can handle all the body and paint, just not sure on the correct assembly using the original bolts and hardware. I know my dad has just about everything to complete car, just trying to locate everything is a major task. Will be asking for help as i get to that point in the restoration. Thanks in advance.
oldhenry11-11-2012203.jpg 34 ford (2).jpg oldhenry11-11-2012168.jpg oldhenry11-11-2012207.jpg |
12-12-2019, 03:27 PM | #2 |
Senior Member
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 3,963
|
Re: project 1934 deluxe coupe
Wow, nice ride. Welcome to the "Barn". You will find a lot of expert help here. Just remember there are different levels of involvement here so make sure you make your questions clear and to the point and to what level of originality and detail you are striving to achieve. AND pictures always are a big help and appreciated. There are a few on here that when they give you information, you can take it to the bank as the level of knowledge is unprecedented. SO good luck and thanks for sharing
|
Sponsored Links (Register now to hide all advertisements) |
|
12-12-2019, 03:32 PM | #3 |
Member
Join Date: Dec 2012
Location: northwest indiana
Posts: 40
|
Re: project 1934 deluxe coupe
^^^ Thanks. I want the car to be correct as I can possibly can get it. Its not going to be a perfect car, as I believe there is no such thing. But would like it accurate.
|
12-12-2019, 03:46 PM | #4 |
Senior Member
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 3,963
|
Re: project 1934 deluxe coupe
Might suggest following "A FEW" of the 33-34 "woodgrain" post running right now, LOTS of good info to read, look at and take note of. You will see a "few" names/handles of a few of the members there to "take note" of. It will also give you a good idea of the "level" of knowledge and depth of resources at hand. Enjoy.
Last edited by rockfla; 12-12-2019 at 03:57 PM. |
12-12-2019, 03:53 PM | #5 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: project 1934 deluxe coupe
Looks like a good start!
|
12-12-2019, 04:13 PM | #6 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,102
|
Re: project 1934 deluxe coupe
Sponsored Links (Register now to hide all advertisements)
|
12-12-2019, 04:14 PM | #7 |
Senior Member
Join Date: Sep 2013
Posts: 3,005
|
Re: project 1934 deluxe coupe
welcome...
Last edited by FrankWest; 12-12-2019 at 05:30 PM. |
12-12-2019, 04:39 PM | #8 |
Senior Member
Join Date: Apr 2018
Location: Chelmsford, ON Canada
Posts: 529
|
Re: project 1934 deluxe coupe
If you want close to original, go to the Early Ford V8 site. There are a lot of knowledgeable people on the site and are very helpful. You might consider joining the EFV8 club as well. The magazine the club publishes is excellent and full of supplier info, parts for sale and wanted, all dedicated to early fords.
https://www.earlyfordv8.org/ |
12-12-2019, 04:45 PM | #9 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,102
|
Re: project 1934 deluxe coupe
With respect, I disagree with the "Only purchase what you need to complete that (one project) task approach" as having been taught otherwise by the experience of numerous restorations spread out over the last fifty plus years.
Instead work on developing as complete a list of what you will need for the entire project as possible so that when opportunity knocks in the form of reasonably-price items in good condition turn up at swap meets and on selling websites (The Swap Meet herein, for example) you can take advantage of it. Original '34 parts vary all over the map in terms of availability and asking price and has been shown with numerous examples, both recent and in the past, good reproduction parts are not available indefinitely. What is available today may well not be available six months hence, let alone several years from now. One good place to start is to acquire the '34 version of Ford's body and chassis parts catalogs, both of which are available in reprint form. Another valuable source of accurate information is the 1934 version of the Ford hardware catalogue. It was reprinted in the past and while likely out of print at present, copies show up periodically herein, ebay, amazon, and the Early Ford V8 Club website. Last edited by DavidG; 12-12-2019 at 04:50 PM. |
12-12-2019, 04:46 PM | #10 |
Senior Member
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
|
Re: project 1934 deluxe coupe
Nice project!!
As mentioned above, you should join the Early Ford V-8 Club. The bi-monthly magazine is worth the membership alone.. Not to give a sales pitch, but if nuts and bolts are a concern, check out fordbolts.com Also, while not correct for the car, that is a mighty rare generator on the engine that many refer to as the "police" generator. |
12-12-2019, 04:49 PM | #11 |
Senior Member
Join Date: Sep 2013
Posts: 3,005
|
Re: project 1934 deluxe coupe
Last edited by FrankWest; 12-12-2019 at 06:01 PM. |
12-12-2019, 06:06 PM | #12 | |
Member
Join Date: Dec 2012
Location: northwest indiana
Posts: 40
|
Re: project 1934 deluxe coupe
Quote:
not really sure about generator, I was under the impression that it was used for a car with a radio? I have a lot to learn. thank you |
|
12-13-2019, 08:04 AM | #13 |
Senior Member
Join Date: Mar 2014
Location: Jacksonville FL
Posts: 3,963
|
Re: project 1934 deluxe coupe
As mentioned above, a couple have already imparted knowledge here that don't get much (IF any) better. ALSO as another recommendation beyond joining the Early Ford V8 Club IS.......The EFV8 club also sells year specific "Restoration Manuals" i.e 1933/1934 and would ALSO be of the must get items behind the ones already mention by DAVIDG.
|
12-14-2019, 01:27 PM | #14 |
Senior Member
Join Date: May 2010
Location: westport ct.
Posts: 166
|
Re: project 1934 deluxe coupe
I see your in North West Indiana! I think a trip to the Early Ford V-8 Foundation Museum in Auburn, In. could be a wealth of information and possible parts for your project. their number is (260)927-8022; E-Mail fordv8foundation.org.
|
12-15-2019, 04:34 PM | #15 |
Senior Member
Join Date: May 2010
Location: Sugar Land, TX
Posts: 4,395
|
Re: project 1934 deluxe coupe
For example Lebaron Bonney who many in the old Ford community depended on for excellent upholstery is no longer open.
__________________
41 woodie https://41fordwoodie.weebly.com/ |
12-15-2019, 04:46 PM | #16 |
Senior Member
Join Date: May 2012
Location: Grove City, Oh
Posts: 255
|
Re: project 1934 deluxe coupe
I second the trip to the Early Ford museum In Auburn/Ft Wayne. I was just there in August.
Not to pry, but is dad still around? Is everything squirreled away "in the garage" somewhere? I'm interested in that part of the story. What a great set of bones to start with. T |
12-15-2019, 05:34 PM | #17 | |
Member
Join Date: Dec 2012
Location: northwest indiana
Posts: 40
|
Re: project 1934 deluxe coupe
Quote:
|
|
12-15-2019, 06:16 PM | #18 |
Senior Member
Join Date: May 2012
Location: Grove City, Oh
Posts: 255
|
Re: project 1934 deluxe coupe
Wow. What a great way to celebrate your dad. I'm sorry for your loss. My dad passed in Nov. of 18, so I'm a year out. Miss him everyday. I'm in the process of buying parts for a '36 sedan that my FIL passed on to me before he passed away 6 years ago.
What a treasure hunt. Finding all the parts and finally bringing your dads vision to reality. Please keep us updated as you make progress. Thanks for including us. |
12-15-2019, 08:01 PM | #19 |
Member
Join Date: Dec 2012
Location: northwest indiana
Posts: 40
|
Re: project 1934 deluxe coupe
113.jpgoldhenry11-11-2012209.jpgThanks everyone for the tips. I will post progress as i make it. Going to be a while as I have to move everything from his garage to mine. He has a ton of stuff that he has accumulated over the years. Not going to be an easy task. Jim
|
12-15-2019, 10:04 PM | #20 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,102
|
Re: project 1934 deluxe coupe
Looks like you have excellent sheet metal to work with and a obviously original seat,
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|