|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-22-2016, 01:25 PM | #1 |
Senior Member
Join Date: May 2010
Location: Claremont, CA 91711
Posts: 244
|
Seal Drip Rail Gutters on 30 Coupe
The pictures are of the drip rails on my 30 coupe. They are welded on and I am not going to remove them. I can straighten the gutter and push it back but there will still be a gap. What should I use to seal the gaps between the roof and the gutters (shown In the pictures)?
|
04-22-2016, 01:30 PM | #2 |
Senior Member
Join Date: May 2010
Posts: 433
|
Re: Seal Drip Rail Gutters on 30 Coupe
You could try "Seaming Compound". It's the stuff used to seal panels that have been spot-welded together (seams in trunks, etc.). You can prime and paint it just fine. I have some in a quart can that I bought long ago from an automotive paint supplier. I think you can also get it in a tube for a caulking gun. I think that Eastwood also has it.
|
Sponsored Links (Register now to hide all advertisements) |
|
04-22-2016, 02:14 PM | #3 |
Senior Member
Join Date: Dec 2012
Location: HOLDEN, MAINE
Posts: 133
|
Re: Seal Drip Rail Gutters on 30 Coupe
Silicone would work just fine. Can be painted also. Give it 24 hours to set up.
__________________
MY PROBLEM CHILD! |
04-22-2016, 02:33 PM | #4 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: Seal Drip Rail Gutters on 30 Coupe
Bruce's idea sounds good ..
We use this seam sealer |
04-22-2016, 09:37 PM | #5 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Seal Drip Rail Gutters on 30 Coupe
Silicone promotes rust, as I learned from a windshield installer. Use what Mitch shows.
|
04-23-2016, 06:46 AM | #6 |
Senior Member
Join Date: Apr 2014
Location: Kennesaw, Ga
Posts: 511
|
Re: Seal Drip Rail Gutters on 30 Coupe
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|