The Ford Barn

54 Watusi Ford · 08-21-2019, 03:26 PM

Does anyone know how the glass of a 52 - 54 Customline tudor sedan attaches to the window regulator? I have a shop manual and it really doesn't say. Thank you

Robz51 · 08-22-2019, 01:01 PM

It uses 2 rollers that ride on fwd and aft tracks at the bottom of the window. You pretty much have to remove the wing window (if at front) and possibly remove the regulator to get them to slide out.
Rob

54 Watusi Ford · 08-22-2019, 04:21 PM

Sponsored Links (Register now to hide all advertisements)

Thank you Rob. Actually this is behind the drivers door. The quarter window rolls up and down. If I roll it all the way up or all the way down, I can't see the mount, so I don't want to just start tugging on the glass.

08-21-2019, 03:26 PM	#1
54 Watusi Ford Junior Member Join Date: Aug 2019 Location: Peoria AZ Posts: 4	52 - 54 customline tudor quarter window Does anyone know how the glass of a 52 - 54 Customline tudor sedan attaches to the window regulator? I have a shop manual and it really doesn't say. Thank you

08-22-2019, 01:01 PM	#2
Robz51 Senior Member Join Date: May 2010 Location: Rogers, AR, USA Posts: 141	Re: 52 - 54 customline tudor quarter window It uses 2 rollers that ride on fwd and aft tracks at the bottom of the window. You pretty much have to remove the wing window (if at front) and possibly remove the regulator to get them to slide out. Rob

08-22-2019, 04:21 PM	#3
54 Watusi Ford Junior Member Join Date: Aug 2019 Location: Peoria AZ Posts: 4	Re: 52 - 54 customline tudor quarter window Sponsored Links (Register now to hide all advertisements) Thank you Rob. Actually this is behind the drivers door. The quarter window rolls up and down. If I roll it all the way up or all the way down, I can't see the mount, so I don't want to just start tugging on the glass.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode