|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-25-2024, 01:37 PM | #1 |
Junior Member
Join Date: Dec 2015
Posts: 7
|
1941 Lincoln front backing plates with Ford drums
I have original 1941 Lincoln backing plates installed on 1940 Ford spindles.
Can I use 1940 Ford hubs and drums on this setup with no problems? I also have the Lincoln hubs/drums but don't want to use them because of the more narrow offset wheel spacing. This is on a 1934 ford. Thanks. |
03-25-2024, 02:55 PM | #2 |
Senior Member
Join Date: May 2010
Location: Land of the Midnight Sun
Posts: 157
|
Re: 1941 Lincoln front backing plates with Ford drums
Yes, you can use all 1937-48 Ford front hubs and drums on the 1941 front Lincoln backing plates with the 1940 Ford spindles without any problems. That's why the 1941 Lincoln front backing plates are so desired.
|
Sponsored Links (Register now to hide all advertisements) |
|
03-26-2024, 06:42 AM | #3 |
Junior Member
Join Date: Dec 2015
Posts: 7
|
Re: 1941 Lincoln front backing plates with Ford drums
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|