|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-20-2014, 07:32 PM | #1 |
Senior Member
Join Date: May 2010
Location: Miami, Florida
Posts: 423
|
1939 Ford Deluxe Radiator Hold Down Spring
There is a spring on each side of the bottom the radiator to hold it to the frame. What is the order of installation. From the top is it bolt, spring, radiator, rubber pad, nut and cotter pin. Or is all reversed with the spring under the frame. Pretty anal, I know, but it is better than to have to take it off later because everyone who sees it says its upside down!
|
10-20-2014, 07:54 PM | #2 |
Senior Member
Join Date: May 2010
Location: Star, MS
Posts: 4,022
|
Re: 1939 Ford Deluxe Radiator Hold Down Spring
Sponsored Links (Register now to hide all advertisements)
Bolt, Radiator, Pad, frame, spring, nut, cotter key. Obviously, don't compress the spring to the point it binds. The spring is there to let the radiator flex on the chassis. |
Sponsored Links (Register now to hide all advertisements) |
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|