11-11-2020, 06:06 PM | #1 |
Junior Member
Join Date: Mar 2018
Posts: 17
|
1929 u joint
I am in the process of tearing down my 29 roadster pickup. I pulled the trans and was looking at the front u joint. It has a very sloppy fit around what I call the caps. To me the caps are what hold the needle bearings on current style u joints. If I was to compare this to a current u joint and the way it fits, I would throw it away.
So my question is should this ujoint be tight like current ones are on cars or were they made with a loose fit. I am considering going with a complete new one just to be safe. Thanks in advance for the feedback. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|