The Ford Barn

DBSHELTON · 08-30-2020, 09:32 PM

I installed a Borg-Warner OD in my Huckster. Now I am trying to figure out the wiring. There are quite a few different wiring diagrams out there and I am really confused. 6 volt Positive ground system. On the unit, I have 2 wires coming out of the OD Solenoid and there is 1 wire coming out of the OD Governor. I have an old Standard Blue Streak 3 post relay. 1 terminal marked "B" 1 marked "L" and 1 marked "S". My intent is to use an over-ride switch instead of a kickdown switch. I guess I could mount the kickdown switch on the dash instead. Can someone help me figure out how this all ties together?

08-30-2020, 09:32 PM	#1
DBSHELTON Senior Member Join Date: Sep 2019 Location: Kountze,TX Posts: 313	Borg-Warner OD Wiring I installed a Borg-Warner OD in my Huckster. Now I am trying to figure out the wiring. There are quite a few different wiring diagrams out there and I am really confused. 6 volt Positive ground system. On the unit, I have 2 wires coming out of the OD Solenoid and there is 1 wire coming out of the OD Governor. I have an old Standard Blue Streak 3 post relay. 1 terminal marked "B" 1 marked "L" and 1 marked "S". My intent is to use an over-ride switch instead of a kickdown switch. I guess I could mount the kickdown switch on the dash instead. Can someone help me figure out how this all ties together? Last edited by DBSHELTON; 08-31-2020 at 06:11 AM.