The Ford Barn

RTC1930 · 05-24-2010, 09:47 PM

Sponsored Links (Register now to hide all advertisements)

Im trying to remove the visor over the windshield from my briggs town sedan so I can clean up some of the rust I know is hiding behind it. The two screws on either end of the front pillars are stuck pretty good and I only get a half turn out of each. Does anyone know how they are fastened? Is the there a nut up in the pillar or a threaded insert in the sheet metal. I thought there was no wood in that area to my knowledge but maybe im wrong.

Thanks for your help,
Bob, NJ

05-24-2010, 09:47 PM	#1
RTC1930 Senior Member Join Date: May 2010 Location: Stockholm, NJ Posts: 106	Sedan Visor Removal Sponsored Links (Register now to hide all advertisements) Im trying to remove the visor over the windshield from my briggs town sedan so I can clean up some of the rust I know is hiding behind it. The two screws on either end of the front pillars are stuck pretty good and I only get a half turn out of each. Does anyone know how they are fastened? Is the there a nut up in the pillar or a threaded insert in the sheet metal. I thought there was no wood in that area to my knowledge but maybe im wrong. Thanks for your help, Bob, NJ